Operation Manual

80
You can set the shutter speed to a range between 1 and 15 seconds to
shoot long exposures. However, you should attach the camera to a tripod to
prevent the camera from moving and blurring the image.
Select ≈.
● After pressing the æ button, press the
qr buttons to select K.
● Press the op buttons to select ≈, then
press the m button.
Select the shutter speed.
● After pressing the m button, press the
op buttons to select ).
● Press the qr buttons to select a shutter
speed, then press the m button.
Confirm the exposure.
● When you press the shutter button
halfway, the exposure for the selected
shutter speed will appear.
≈ Shooting Long Exposures
• The brightness of the image may differ from the brightness of the screen
in Step 3 when the shutter button was pressed halfway.
• When shutter speeds of 1.3 seconds or slower are used, images are
processed to eliminate noise after being taken. A certain amount of
processing time may be needed before you can take the next shot.
If the flash fires, the image may be overexposed. If this happens, set the
flash to ! and shoot.