User's Manual

Shooting Range and Focusing

This mode helps avoid missing shots of subjects in motion, because the

camera continues to focus on the subject and adjust the exposure as long as

you press the shutter button halfway.

Configure the setting.

z Press the n button, choose [Servo AF]

on the 4 tab, and then choose [On] (p. 45).

Focus.

z The focus and exposure are maintained

where the blue AF frame is displayed while

you are pressing the shutter button halfway.

Shooting with Servo AF

Still Images

• Focusing may not be possible in some shooting conditions.

• In low-light conditions, Servo AF may not be activated (AF frames

may not turn blue) when you press the shutter button halfway. In this

case, the focus and exposure are set according to the specified AF

frame mode.

• If adequate exposure cannot be obtained, shutter speeds and

aperture values are displayed in orange. Release the shutter button,

and then press it halfway again.

• AF lock shooting is not available.

• [AF-Point Zoom] on the 4 tab is not available.

• Not available when using the self-timer (p. 57).

COPY