Digital Camera User Guide PowerShot A200, PowerShot A100

9998
Using the Household Power Source
(AC Adapter Kit ACK800)
Use of the ACK800 optional AC adapter kit is
recommended when using the camera
continuously for prolonged periods of time and
when connecting to a computer.
Be sure that the camera is turned off before
connecting or disconnecting the compact power
adapter.
1
Connect the power cable to the
compact power adapter, and then
plug the other end into the electrical
outlet.
To an electrical outlet
2
Open the Terminal cover, and con-
nect the adapter’s DC plug into the
camera’s DC IN terminal.
• Please unplug the adapter from the power
outlet when you have finished using the
camera.
Please do not attempt to use any AC adapter
other than AC Adapter Kit ACK800 with your
camera. Use of a different adapter may result
in damage to the camera or to the adapter kit.
Leaving batteries in the camera or charger may
damage it causing battery leakage.
Remove batteries from the camera or charger
and store in a dry cool location when not in use.
It takes approximately 110 minutes (for two)
and 220 minutes (for four) for the charger to
fully recharge the batteries (as determined
by testing at Canon facilities). Please do not
charge batteries in areas where the tem-
perature is outside the range of 0 to 35 °C
(32 to 104 °F).
Charging time varies according to ambient
temperature and to the batteries’ initial
charge state.
● Appendices ●
● Appendices ●