Operation Manual

Loading Documents in the ADF (Auto Document Feeder)
Note
• To scan a document at optimum quality, load it on the platen.
1. Make sure any original has been removed from platen.
2.
Open document tray (A).
3.
Slide the paper guides (B) all the way out.
4.
Load document WITH SIDE TO SCAN FACING UP in document tray.
Insert the document until it stops.
Note
• For details on the supported originals, see below.
Supported Originals
5. Adjust document guide (B) to match width of document.
Do not slide the document guide too hard against the document. The document may not be fed properly.
116