TS8200 series (PDF) User Manual (Windows)

C: Search...

The Detected Wireless Routers screen is displayed to select a wireless router to connect to.

For a wireless router already connected to the computer, Available is displayed on

Communication Status.

If you select a wireless router with Not Connected on Communication Status from the list,

clicking Set displays the WPA/WPA2 or WEP setting screen for a wireless router.

If WEP Details Screen Appears

If WPA/WPA2 Details Screen Appears

D: Encryption Type:

Displays the encryption method used over the Wi-Fi.

•

IPv4 settings

Note

•

The setting items below are available only when Infrastructure is selected for Network

Type:.

If Direct is selected, all items are displayed in a gray out status and you cannot perform any

settings.

A: Use IPv4 address

Always selected. (displayed in a gray out state)

B: Get IP address automatically

Select this option to use an IP address automatically assigned by a DHCP server. DHCP

server functionality must be enabled on your router.

C: Use next IP address

Select this option if no DHCP server functionality is available in your setup where you use the

printer, or you want to use a fixed IP address.

Enter the IP address, subnet mask, and default gateway.