Operation Manual

If the paper stack is in contact with the protrusion (G), the paper may not be fed properly.
6. Align the paper guide (H) in front with the paper stack.
Align the paper guide (H) with where it clicks into place.
7.
Slide the paper guide (I) on the right to align with the paper stack.
Do not slide the paper guide too hard against the paper. The paper may not be fed properly.
Note
• Do not load sheets of paper higher than the load limit mark (J).
• Keep the paper stack height below the tabs (K) of the paper guides.
8. Mount the cassette cover, and then insert the cassette into the printer.
Push the cassette into the printer until it stops.
After inserting the cassette into the printer, the paper information registration screen for the cassette is
displayed on the touch screen.
72