Operation Manual

8.
Press on the top of the ink tank until the ink tank snaps firmly into place.
Make sure that the ink lamp lights up.
Important
You cannot print if the ink tank is installed in the wrong position. Be sure to install the ink tank in
the correct position according to the label on the print head holder.
You cannot print unless all the ink tanks are installed. Be sure to install all the ink tanks.
9.
Close the scanning unit / cover.
To close the scanning unit / cover, hold it up once, then take it down gently.
If a message is displayed on the screen, select OK.
Caution
When closing the scanning unit / cover, be careful not to get your fingers caught.
82