Operation Manual

Cleaning the Print Head

Clean the print head if lines are missing or if horizontal white streaks are present in the printed nozzle check

pattern. Cleaning unclogs the nozzles and restores the print head condition. Cleaning the print head

consumes ink, so clean the print head only when necessary.

You need to prepare: a sheet of A4 or Letter-sized plain paper

Make sure that the power is turned on.

Load a sheet of A4 or Letter-sized plain paper in the cassette.

After pushing the cassette back, the paper information registration screen is displayed on the touch

screen. Select A4 or Letter for Page size, then select Register.

If a message is displayed on the screen, follow the directions in the message to complete registration.

Note

• Be sure to load paper in the cassette. Even if you load paper on the rear tray, the nozzle check

pattern is not be printed.

Open the operation panel, then pull out the paper output tray.

Select Setup on the HOME screen.

Using the Operation Panel

The setup menu screen will appear.

5. Select Maintenance.

The Maintenance screen will appear.

6. Select Cleaning.