Operation Manual

Aligning the Print Head

If printed ruled lines are misaligned or print results are otherwise unsatisfactory, adjust the print head

position.

Note

• If the remaining ink level is low, the print head alignment sheet will not be printed correctly.

Replace the ink tank whose ink is low.

You need to prepare: a sheet of A4 or Letter-sized plain paper (including recycled paper)*

* Be sure to use paper that is white and clean on both sides.

Make sure that the power is turned on.

Load a sheet of A4 or Letter-sized plain paper.

After closing the feed slot cover, the paper information registration screen is displayed on the LCD.

Select A4 or Letter for Page size and Plain paper for Type, then select Register.

If a message is displayed on the LCD, follow the directions in the message to complete registration.

Open the operation panel, then pull out the paper output tray.

Select Setup on the HOME screen.

LCD and Operation Panel

The setup menu screen will appear.

5. Select Maintenance.

The Maintenance screen will appear.

6. Select Auto head alignment.