Operation Manual

About Receive Mode
DRPD is available only in the US and Canada.
Network switch may not be available depending on the country or region of purchase.
Refer to Receiving Faxes for information on receiving faxes or the procedure for each receive
mode.
6.
If you make the advanced settings, select Yes and press the OK button. If not, select No
and press the OK button.
Make the advanced settings as necessary.
Advanced Settings of Receive Mode
About Receive Mode
You can select the receive mode suitable for your fax use conditions: whether you use a dedicated line for
fax, etc.
TEL priority mode
Select when mainly receiving voice calls (with a telephone or answering machine connected to the
printer).
Receiving operation:
1. When a call incomes, the telephone will ring.
2. Pick up the handset.
If the call is a voice call, talk on the telephone.
If the call is a fax, hang up the handset after the printer starts receiving the fax.
Note
The telephone may not ring when a call incomes even if it is connected to the printer, depending
on the type or settings of the telephone.
DRPD or Network switch
Select when receiving voice calls (with a telephone or answering machine connected to the printer)
and subscribing to a ring pattern detection service provided by your telephone company.
Receiving operation:
1. When a call incomes, the telephone will ring.
2. The printer detects a fax call by the fax ring pattern.
If the call is a fax, the printer will receive the fax automatically.
If the printer does not detect the fax ring pattern, the telephone will continue ringing.
Note
The telephone may not ring when a call incomes even if it is connected to the printers, depending
on the type or settings of the telephone.
262