Operation Manual

Switching the Paper Source to Match the Purpose
In this printer, there are two paper sources, a manual feed tray and a rear tray.
You can facilitate printing by selecting a paper source setting that matches your media type or purpose.
The procedure for setting paper source is as follows:
You can also set the paper source on the Quick Setup tab.
1.
Open the printer driver setup window
2.
Select the media type
Select the type of paper loaded in the printer from the Media Type list on the Main tab.
Note
•
When Other Glossy Paper (Wide Margins), Fine Art "Museum Etching", Other Fine Art
Paper 1, Photo Paper Pro Premium Matte, Other Fine Art Paper 2, or Canvas is selected for
Media Type on the Main tab, click the Page Setup tab and select "XXX (Art Paper Margin 30)"
from the Page Size list.
3.
Select the paper source
From the Paper Source list, select the paper source that matches your purpose.
Manual Feed
Paper is supplied from the manual feed tray in the back.
Important
•
When A5, B5, 4"x6" 10x15cm, 5"x7" 13x18cm, L 89x127mm, 2L 127x178mm, Hagaki
100x148mm, Hagaki 2 200x148mm, Envelope Com 10, Envelope DL, Yougata 4
4.13"x9.25", or Yougata 6 3.86"x7.48" is selected for Page Size on the Page Setup tab,
paper cannot be supplied from the manual feed tray in the back.
322