Operation Manual

A
dvanced Guide
>
A
ppendix
> Transporting the Machine
Transporting the Machine
When relocating the machine, pack the machine using the original packing materials.
If you do not have the original packing materials, pack the machine carefully using protective material
and place it inside a sturdy box.
Important
Do not transport or store the machine slanted, vertically, or upside-down, as the ink may leak and
damage the machine.
1.
Turn the machine off.
2.
Confirm that all the lamps on the Operation Panel have gone out, and then unplug
the machine.
Important
Do not unplug the machine while one of the mode buttons (e.g., the
COPY
button) is lit or
flashing, as it may cause malfunction or damage to the machine, making the machine unable
to print.
3.
Retract the Paper Support and the Output Tray Extension, then close the Paper
Output Tray.
4.
Disconnect the printer cable from the computer and from the machine, and then
disconnect the power plug from the machine.
5.
Use adhesive tape to secure all the covers on the machine to keep them from
opening during transportation. Then pack the machine in the plastic bag.
6.
Attach the protective material to the machine when packing the machine.
Important
Pack the machine with the Print Head and ink tanks left installed in the machine.
Note
Clearly label the box as "FRAGILE" or "HANDLE WITH CARE".
Page top
Page 932 of 997 pagesTransporting the Machine