Operation Manual

A
dvanced Guide
>
Faxing
>
Sending/Receiving Faxes Using the Operation Panel of the Machine
> Using the Caller ID
Service to Reject Calls
Using the Caller ID Service to Reject Calls
If you subscribe to the Caller ID service, the machine detects the sender's Caller ID. If the sender's ID
does not match the conditions specified in this setting, the machine rejects the phone call or fax
reception from the sender.
1.
Press the
FAX button, then press the
Menu
button.
The FAX menu screen is displayed.
2.
Use the button to select Settings, then press the
OK
button.
3.
Use the button to select
Device settings, then press the
OK
button.
4.
Use the button to select FAX settings, then press the
OK
button.
5.
Use the button to select Reception settings, then press the
OK
button.
6.
Use the button to select Caller rejection, then press the
OK
button.
7.
Use the button to select Yes, then press the
OK
button.
You can now perform settings for Caller rejection.
8.
Use the button to select the phone call or fax rejection condition, use the
button to select the setting, then press the
OK
button.
Set the conditions below.
Anonymous no.
Selects whether to reject a phone call or fax reception from a sender with no caller identification.
Out of area
Selects whether to reject a phone call or fax reception out of the subscribed service area.
Rejected numbers
Page 703 of 997 pagesUsing the Caller ID Service to Reject Calls