Operation Manual

Changing the Machine Settings on the LCD
This section describes the procedure to change the settings in the Device settings screen, taking the
steps to specify Extended copy amount as an example.
1.
Make sure that the machine is turned on.
Confirming that the Power Is On
2.
Press the MENU button.
The menu screen is displayed.
3.
Select Setup, then press the OK button.
4. Select Device settings, then press the OK button.
The Device settings screen is displayed.
5. Use the button to select the setting item, then press the OK button.
The setting screen for the selected item is displayed.
6. Use the button to select the menu, then press the OK button.
7.
Use the button to select the setting item, then press the OK button.