Operation Manual

For Two-Sided, select either Long-Edge binding or Short-Edge binding.

4. Select Margin from the pop-up menu on the Print Dialog

5. Set the stapling margin

If necessary, set the Margin width, and to change the Stapling Side, select a setting from the list.

Note

Depending on the Two-Sided setting in the Layout pop-up menu, the Stapling Side that can

be selected differs.

6. Complete the setup

Click Print.

When you execute print, duplex printing will be started.

Important

When a media type other than Plain Paper, Hagaki A, or Hagaki is selected from Media Type

menu of Quality & Media, duplex printing cannot be executed.

When borderless printing is set, duplex printing cannot be executed.

Duplex printing can be performed only when one of the following paper sizes is selected from Paper

Size.

US Letter, A5, A4, JIS B5 (B5 JIS), Postcard

After printing the front page, there is an ink drying wait time before starting to print the back page

(Operation stops temporarily). Do not touch the paper during this time. You can change the ink drying

wait time from Custom Settings in the Canon IJ Printer Utility.

When you use the automatic duplex printing function to print a postcard, print the address side first

and then print the message side.

Note

If the back side of the paper becomes smudged during duplex printing, display the pop-up menu of

Canon IJ Printer Utility, select Cleaning from the menu, and then perform Bottom Plate Cleaning.

When you use duplex printing, the print area becomes slightly smaller than the normal print area.