Operation Manual

Output settings
• Prevent abrasion
Use this setting only if the print surface becomes smudged.
Important
• Be sure to set this back to OFF after printing since it may result in lower printing speed or lower
print quality.
• Extended copy amt.
Selects the amount of image that extends off the paper when copying in Borderless (full).
Slight cropping may occur at the edges since the copied image is enlarged to fill the whole page. You
can change the width to be cropped from the borders of the original image as needed.
Cropped area will be larger if Amount: Large is selected.
Note
• If printouts contain margins even though you are copying in Borderless, specifying Amount: Large
for this setting may help solve the problem.
• Prevent double-feed
Select ON to prevent double-feed of plain paper.
Important
• Select ON only when double-feed of plain paper occurs.
• Detect paper width
When you print from the machine with ON selected, the machine detects the paper width. If the size of
loaded paper does not match with that specified with the machine, a message is displayed on the LCD.
194