MX450 series Online-Handbuch Scannen Deutsch (German)
Scannen Scannen über den Computer Scannen mit IJ Scan Utility Scannen mit der verwendeten Anwendungssoftware (ScanGear) Hilfreiche Informationen über das Scannen Menü und Einstellungsfenster von IJ Network Scanner Selector EX Weitere Scan-Methoden Objekte platzieren (beim Scannen über den Computer) Scannen über das Bedienfeld des Geräts Weiterleiten gescannter Daten auf den Computer mithilfe des Bedienfelds am Gerät Grundlagen Speichern von gescannten Daten auf dem USB-Flashlaufwerk über das Bedienfeld am
Scannen über den Computer Scannen mit IJ Scan Utility Scannen mit der verwendeten Anwendungssoftware (ScanGear) Hilfreiche Informationen über das Scannen Menü und Einstellungsfenster von IJ Network Scanner Selector EX Weitere Scan-Methoden Objekte platzieren (beim Scannen über den Computer)
Scannen über das Bedienfeld des Geräts Weiterleiten gescannter Daten auf den Computer mithilfe des Bedienfelds am Gerät Grundlagen Speichern von gescannten Daten auf dem USB-Flashlaufwerk über das Bedienfeld am Gerät Vornehmen von Einstellungen über das Bedienfeld am Gerät Netzwerk-Scan-Einstellungen Mit IJ Scan Utility ein Verhalten für Befehle vom Bedienfeld auswählen
Scannen mit IJ Scan Utility Was ist IJ Scan Utility (Scanner-Software)? Starten von IJ Scan Utility Einfaches Scannen mit dem automatischen Scan Grundlagen Fotos scannen Dokumente scannen Scannen mit bevorzugten Einstellungen Objekte scannen, die größer als die Auflagefläche sind (Bild zusammenfügen) Mehrere Objekte gleichzeitig scannen Gleichzeitiges Scannen mehrerer Dokumente mit dem ADF (automatischer Dokumenteneinzug) Speichern nach dem Prüfen der Scanergebnisse Gescannte Bilder per E-Mail versenden E
Was ist IJ Scan Utility (Scanner-Software)? IJ Scan Utility ist eine Anwendung, mit der Sie auf einfache Weise Fotos, Dokumente usw. scannen können. Sie können mehrere Schritte, vom Scannen bis zum Speichern, gleichzeitig durchführen, indem Sie auf das entsprechende Symbol im Hauptbildschirm von IJ Scan Utility klicken. Funktionen von IJ Scan Utility Einfach gemäß Verwendungszweck scannen Sie können einfach durch Klicken auf Symbole scannen.
Wichtig Einige Funktionen sind nur verfügbar, wenn My Image Garden installiert ist. Hinweis Informationen zum Festlegen der zu integrierenden Anwendungen finden Sie unter "Dialogfenster "Einstellungen"".
Starten von IJ Scan Utility Hinweis Wenn Sie mehrere Scanner verwenden oder den Verbindungstyp von einer USB- zu einer Netzwerkverbindung geändert haben, richten Sie die Netzwerkverbindung über IJ Scan Utility ein. Netzwerk-Scan-Einstellungen Wählen Sie im Menü Start die Option Alle Programme (All Programs) > Canon Utilities > IJ Scan Utility > IJ Scan Utility, um IJ Scan Utility zu starten.
Einfaches Scannen mit dem automatischen Scan Vereinfachen Sie das Scannen durch die automatische Erkennung des Objekttyps. Wichtig Die folgenden Objekttypen können möglicherweise nicht korrekt gescannt werden. Passen Sie in diesem Fall die Schnittrahmen (Scanbereiche) in der Gesamtbildansicht von ScanGear (ScannerTreiber) an und scannen Sie erneut. Fotos mit weißlichem Hintergrund Auf weißem Papier gedruckte Objekte, handgeschriebene Dokumente, Visitenkarten usw.
Fotos scannen Sie können auf der Auflagefläche liegende Fotos mit den für Fotos geeigneten Einstellungen scannen. 1. Legen Sie das Foto auf die Auflagefläche. Objekte platzieren (beim Scannen über den Computer) 2. Starten Sie IJ Scan Utility. Starten von IJ Scan Utility 3. Klicken Sie auf Einst... (Settings...), wählen Sie das Dialogfenster Einstellungen (Foto scannen) (Settings (Photo Scan)), und geben Sie das Papierformat, die Auflösung etc. an.
Dokumente scannen Sie können auf der Auflagefläche liegende Objekte mit den für Dokumenten geeigneten Einstellungen scannen. 1. Legen Sie das Objekt auf die Auflagefläche. Objekte platzieren (beim Scannen über den Computer) 2. Starten Sie IJ Scan Utility. Starten von IJ Scan Utility 3. Klicken Sie auf Einst... (Settings...), wählen Sie das Dialogfenster Einstellungen (Dokument scannen) (Settings (Document Scan)), und geben Sie das Papierformat, die Auflösung etc. an.
Scannen mit bevorzugten Einstellungen Sie können auf der Auflagefläche liegende Objekte mit Ihren bevorzugten und vorab gespeicherten Einstellungen scannen. Dies ist praktisch für das Speichern von häufig verwendeten Einstellungen und das Festlegen von detaillierten Scaneinstellungen. 1. Starten Sie IJ Scan Utility. Starten von IJ Scan Utility 2. Klicken Sie auf Einst... (Settings...
Objekte scannen, die größer als die Auflagefläche sind (Bild zusammenfügen) Sie können die rechten und linken Hälften eines Objekts, das größer als die Auflagefläche ist, scannen und die gescannten Bilder anschließend wieder zu einem Bild zusammenfügen. Es werden Objekte unterstützt, die etwa doppelt so groß wie die Auflagefläche sind. Hinweis Nachfolgend wird beschrieben, wie mit dem Scannen des Objekts begonnen wird, das auf der linken Bildschirmseite angezeigt werden soll. 1.
5. Stellen Sie sicher, dass Von links scannen (Scan from Left) unter Scanrichtung (Scan Direction) ausgewählt ist. 6. Legen Sie das Objekt, das auf der linken Bildschirmseite angezeigt werden soll, mit dem Schriftbild nach unten auf die Auflagefläche. 7. Klicken Sie auf Scannen von Bild 1 beginnen (Start Scanning Image 1).
Das erste Objekt wird gescannt und in 1 angezeigt. Hinweis Klicken Sie auf Abbrechen (Cancel), um den Scanvorgang abzubrechen. 8. Legen Sie das Objekt, das auf der rechten Bildschirmseite angezeigt werden soll, mit dem Schriftbild nach unten auf die Auflagefläche. 9. Klicken Sie auf Scannen von Bild 2 beginnen (Start Scanning Image 2). Das zweite Objekt wird gescannt und in 2 angezeigt. Hinweis Klicken Sie auf Abbrechen (Cancel), um den Scanvorgang abzubrechen.
10. Passen Sie die gescannten Bilder nach Ihren Vorstellungen an. Verwenden Sie die Symbolleiste zum Drehen und Vergrößern/Verkleinern, oder ziehen Sie die Bilder, um ihre Position zu ändern. Hinweis Aktivieren Sie das Kontrollkästchen Schnittrahmen anpassen (Adjust cropping frames), um den zu speichernden Bereich festzulegen.
Das zusammengesetzte Bild wird gespeichert. Hinweis Unter "Fenster "Bild zusammenfügen"" finden Sie weitere Informationen zum Fenster Bild zusammenfügen (Image Stitch). Sie können erweiterte Einstellungen für das Scannen im Dialogfeld Einstellungen (Scannen und zusammenfügen) (Settings (Scan and Stitch)) vornehmen, das durch Klicken auf Einst... (Settings...) angezeigt wird.
Mehrere Objekte gleichzeitig scannen Sie können zwei oder mehr Fotos (kleine Objekte) auf der Auflagefläche gleichzeitig scannen und jedes Bild einzeln speichern. Wichtig Die folgenden Objekttypen können möglicherweise nicht korrekt zugeschnitten werden. Passen Sie in diesem Fall die Schnittrahmen (Scanbereiche) in der Gesamtbildansicht von ScanGear (ScannerTreiber) an und scannen Sie erneut.
5. Wählen Sie unter Quelle wählen (Select Source) den Typ der zu scannenden Objekte aus. 6. Wählen Sie Automatisch scannen (Auto scan) unter Papierformat (Paper Size) aus, und klicken Sie dann auf OK.
Der Hauptbildschirm von IJ Scan Utility wird angezeigt. Hinweis Auf den folgenden Seiten finden Sie Einzelheiten zu den Einstellungselementen im Dialogfeld Einstellungen. Dialogfenster "Einstellungen (Foto scannen)" Dialogfenster "Einstellungen (Dokument scannen)" Dialogfenster "Einstellungen (Benutzerdefiniert scannen)" 7. Klicken Sie auf Benutzerdef. (Custom). Es werden mehrere Objekte gleichzeitig gescannt. Hinweis Klicken Sie auf Abbrechen (Cancel), um den Scanvorgang abzubrechen.
Gleichzeitiges Scannen mehrerer Dokumente mit dem ADF (automatischer Dokumenteneinzug) Legen Sie mehrere Dokumente in den ADF (automatischer Dokumenteneinzug) und scannen Sie sie gleichzeitig. Hinweis Sie können mehrere Dokumente gleichzeitig mit dem ADF scannen, wenn Sie über Automatisch (Auto), Dokument (Document), Benutzerdef. (Custom) oder ScanGear scannen.
5. Wählen Sie unter Quelle wählen (Select Source) den Typ der zu scannenden Dokumente aus. Wählen Sie Dokument (ADF/Auflagefläche) (Document (ADF/Platen)) oder Dokument (ADF Simplex) (Document (ADF Simplex)), wenn Sie nur die Vorderseite der Dokumente scannen möchten. Wählen Sie die Option Dokument (ADF Duplex manuell) (Document (ADF Manual Duplex)), wenn Sie die Vorderseite und danach die Rückseite der Dokumente scannen möchten. 6.
unter Bindungsseite (Binding Side) hängt ab, wie die Dokumente beim Scannen der Rückseiten zu platzieren sind. Wenn Sie die Einstellungen vorgenommen haben, klicken Sie auf OK. Der Hauptbildschirm von IJ Scan Utility wird angezeigt. Hinweis Auf den folgenden Seiten finden Sie Einzelheiten zu den Einstellungselementen im Dialogfeld Einstellungen. Dialogfenster "Einstellungen (Dokument scannen)" Dialogfenster "Einstellungen (Benutzerdefiniert scannen)" 7. Klicken Sie auf Dokument (Document).
Wenn unter Einstell. Dokumentenscanausrichtg... (Document Scan Orientation Settings...) für Bindungsseite (Binding Side) die Einstellung Lange Seite (Long edge) ausgewählt wurde Platzieren Sie die Dokumente, nachdem Sie Ausgabedokumente um 180 Grad gedreht haben. Wenn unter Einstell. Dokumentenscanausrichtg... (Document Scan Orientation Settings...
Speichern nach dem Prüfen der Scanergebnisse Sie können die Scanergebnisse prüfen und die Bilder dann auf einem Computer speichern. Wichtig Sie können die Scanergebnisse nicht vor dem Speichern prüfen, wenn Sie mit der Einstellung Automatisch (Auto) oder über das Bedienfeld scannen. Hinweis Die Bildschirme für das Scannen von Fotos werden in den folgenden Beschreibungen als Beispiele verwendet. 1. Starten Sie IJ Scan Utility. Starten von IJ Scan Utility 2. Klicken Sie auf Einst... (Settings...).
Der Hauptbildschirm von IJ Scan Utility wird angezeigt. Hinweis Auf den folgenden Seiten finden Sie Einzelheiten zu den Einstellungselementen im Dialogfeld Einstellungen. Dialogfenster "Einstellungen (Foto scannen)" Dialogfenster "Einstellungen (Dokument scannen)" Dialogfenster "Einstellungen (Benutzerdefiniert scannen)" Dialogfenster "Einstellungen (Scannen und zusammenfügen)" Dialogfenster "Einstellungen (ScanGear)" 5. Klicken Sie auf Foto (Photo). Der Scan-Vorgang wird gestartet.
Windows XP: Ordner Eigene Dateien (My Documents) 7. Klicken Sie auf OK. Die gescannten Bilder werden wie angegeben gespeichert.
Gescannte Bilder per E-Mail versenden Sie können gescannte Bilder per E-Mail versenden. Hinweis Die Bildschirme für das Scannen von Fotos werden in den folgenden Beschreibungen als Beispiele verwendet. 1. Starten Sie IJ Scan Utility. Starten von IJ Scan Utility 2. Klicken Sie auf Einst... (Settings...). Das Dialogfeld Einstellungen wird angezeigt. Dialogfenster "Einstellungen" 3. Klicken Sie auf Foto scannen (Photo Scan). 4.
Hinweis Sie können für Anhänge zu verwendende E-Mail-Programme aus dem Pull-Down-Menü hinzufügen. Wenn Keines (manuell anhängen) (None (Attach Manually)) ausgewählt ist, hängen Sie die gescannten und gespeicherten Bilder manuell an eine E-Mail an. 5. Klicken Sie auf OK. Der Hauptbildschirm von IJ Scan Utility wird angezeigt. Hinweis Auf den folgenden Seiten finden Sie Einzelheiten zu den Einstellungselementen im Dialogfeld Einstellungen.
Dialogfenster "Einstellungen (Benutzerdefiniert scannen)" Dialogfenster "Einstellungen (ScanGear)" 6. Klicken Sie auf Foto (Photo). Der Scan-Vorgang wird gestartet. Nach Abschluss des Scanvorgangs wird das festgelegte E-Mail-Programm automatisch gestartet, und die Bilder werden an eine neue Nachricht angehängt. Hinweis Klicken Sie auf Abbrechen (Cancel), um den Scanvorgang abzubrechen. Die gescannten Bilder werden entsprechend den im Dialogfeld Einstellungen vorgenommenen Einstellungen gespeichert.
Extrahieren von Text aus gescannten Bildern (OCR) Scannen Sie Text in gescannten Zeitschriften und Zeitungen und zeigen Sie ihn im Windows-Editor an. Hinweis Sie können Text beim Scannen über Dokument (Document), Benutzerdef. (Custom) oder ScanGear extrahieren. Die Bildschirme für das Scannen von Dokumenten werden in den folgenden Beschreibungen als Beispiele verwendet. 1. Starten Sie IJ Scan Utility. Starten von IJ Scan Utility 2. Klicken Sie auf Einst... (Settings...).
Hinweis Wird My Image Garden angegeben, wird nach dem Scannen des Bilds der Text im Bild extrahiert und im Editor von Windows angezeigt. 5. Klicken Sie auf OK. Der Hauptbildschirm von IJ Scan Utility wird angezeigt. Hinweis Auf den folgenden Seiten finden Sie Einzelheiten zu den Einstellungselementen im Dialogfeld Einstellungen.
6. Klicken Sie auf Dokument (Document). Der Scan-Vorgang wird gestartet. Nach dem Abschluss des Scanvorgangs werden die gescannten Bilder gemäß Einstellungen gespeichert, und der extrahierte Text wird in der angegebenen Anwendung angezeigt. Hinweis Klicken Sie auf Abbrechen (Cancel), um den Scanvorgang abzubrechen. Der Text, der im Windows-Editor angezeigt wird, dient nur der Orientierung.
Bildschirme von IJ Scan Utility Hauptbildschirm von IJ Scan Utility Dialogfenster "Einstellungen" Dialogfenster "Einstellungen (Automatisch scannen)" Dialogfenster "Einstellungen (Foto scannen)" Dialogfenster "Einstellungen (Dokument scannen)" Dialogfenster "Einstellungen (Benutzerdefiniert scannen)" Dialogfenster "Einstellungen (Scannen und zusammenfügen)" Dialogfenster "Einstellungen (ScanGear)" Dialogfenster "Einstellungen (Auf PC speichern (automatisch))" Dialogfenster "Einstellungen (Auf PC speichern (
Hauptbildschirm von IJ Scan Utility Wählen Sie im Menü Start die Option Alle Programme (All Programs) > Canon Utilities > IJ Scan Utility > IJ Scan Utility, um IJ Scan Utility zu starten. Sie können verschiedene Arbeitsschritte, vom Scannen bis zum Speichern, auf einmal ausführen, indem Sie auf das entsprechende Symbol klicken. • Produktname (Product Name) Zeigt den Namen des Produkts an, das zurzeit von IJ Scan Utility verwendet wird.
Im Dialogfeld Einstellungen (ScanGear) (Settings (ScanGear)) können die Anwendungen und Einstellungen für das Scannen/Speichern angegeben werden. Dialogfenster "Einstellungen (ScanGear)" • Anweisungen (Instructions) Öffnet dieses Handbuch. • Einst... (Settings...) Zeigt das Dialogfeld Einstellungen an, in dem Sie die Einstellungen für das Scannen/Speichern und das Verhalten nach dem Scannen angeben können.
Dialogfenster "Einstellungen" Das Dialogfenster für Einstellungen hat drei Registerkarten: (Scannen über den Computer), (Scannen über das Bedienfeld) und (Allgemeine Einstellungen). Wenn Sie auf eine Registerkarte klicken, ändert sich die Ansicht im roten Rahmen, und Sie können erweiterte Einstellungen für Funktionen auf den Registerkarten vornehmen. Registerkarte (Scannen über den Computer) Sie können das Verhalten für das Scannen über IJ Scan Utility oder My Image Garden festlegen.
Registerkarte (Allgemeine Einstellungen) Sie können das zu verwendende Produkt, die Dateigrößenbeschränkung für E-Mail-Anhänge, die Sprache für die Erkennung von Text in Bildern und einen Ordner für das vorübergehende Speichern von Bildern festlegen.
Dialogfenster "Einstellungen (Automatisch scannen)" Klicken Sie auf der Registerkarte (Scannen über den Computer) auf Automatisch scannen (Auto Scan), um das Dialogfeld Einstellungen (Automatisch scannen) (Settings (Auto Scan)) anzuzeigen. Im Dialogfeld Einstellungen (Automatisch scannen) (Settings (Auto Scan)) können Sie erweiterte Scaneinstellungen vornehmen, um mit automatischer Erkennung des Objekttyps zu scannen.
Hinweis Um den Moiré-Effekt beim Scannen zu reduzieren, setzen Sie Quelle wählen (Select Source) im Dialogfenster Einstellungen (Dokument scannen) (Settings (Document Scan)) oder Einstellungen (Benutzerdefiniert scannen) (Settings (Custom Scan)) auf Zeitschrift (Magazine), und klicken Sie dann im Hauptbildschirm von IJ Scan Utility auf Dokument (Document) oder Benutzerdef. (Custom).
Wählen Sie die Option aus, wenn Sie die gescannten Bilder verbessern oder korrigieren möchten. Sie können die Anwendung über das Pull-Down-Menü angeben. • An Anwendung senden (Send to an application) Wählen Sie diese Option aus, wenn Sie die gescannten Bilder unverändert in einer Anwendung verwenden möchten, in der Sie die Bilder durchsuchen oder organisieren können. Sie können die Anwendung über das Pull-Down-Menü angeben.
Dialogfenster "Einstellungen (Foto scannen)" Klicken Sie auf der Registerkarte (Scannen über den Computer) auf Foto scannen (Photo Scan), um das Dialogfeld Einstellungen (Foto scannen) (Settings (Photo Scan)) anzuzeigen. Im Dialogfeld Einstellungen (Foto scannen) (Settings (Photo Scan)) können Sie erweiterte Einstellungen für das Scannen von Objekten als Fotos festlegen.
Wählen Sie die Größe des zu scannenden Objekts aus. Wenn Sie die Option Benutzerdefiniert (Custom) auswählen, wird ein Bildschirm angezeigt, in dem Sie das Papierformat angeben können. Wählen Sie eine Option für Einheit (Unit), geben Sie die Breite (Width) und Höhe (Height) an, und klicken Sie dann auf OK. Hinweis Klicken Sie auf Standard (Defaults), um die festgelegten Einstellungen auf die Standardeinstellungen zurückzusetzen.
Windows 7: Ordner Eigene Dateien (My Documents) Windows Vista: Ordner Dokumente (Documents) Windows XP: Ordner Eigene Dateien (My Documents) Wichtig Wenn das Dialogfeld Einstellungen über My Image Garden geöffnet wird, wird diese Option nicht angezeigt. • Scanergebnisse prüfen (Check scan results) Zeigt das Dialogfeld Speichereinstellungen (Save Settings) nach dem Scannen an.
Dialogfenster "Einstellungen (Dokument scannen)" Klicken Sie auf der Registerkarte (Scannen über den Computer) auf Dokument scannen (Document Scan), um das Dialogfeld Einstellungen (Dokument scannen) (Settings (Document Scan)) anzuzeigen. Im Dialogfeld Einstellungen (Dokument scannen) (Settings (Document Scan)) können Sie erweiterte Einstellungen für das Scannen von Objekten als Dokumente festlegen.
Hinweis Wenn Dokument (ADF/Auflagefläche) (Document (ADF/Platen)) ausgewählt ist und sowohl auf der Auflagefläche als auch im ADF Dokumente platziert sind, werden die Dokumente im ADF gescannt. • Farbmodus (Color Mode) Wählen Sie den Farbmodus, in dem das Objekt gescannt werden soll. Wichtig Deaktivieren Sie zum Auswählen von Schwarzweiß (Black and White) das Kontrollkästchen Gescannte Bilder beim Übertragen komprimieren (Compress scanned images upon transfer).
• Gescannte Bilder beim Übertragen komprimieren (Compress scanned images upon transfer) Komprimiert gescannte Bilder beim Übertragen auf einen Computer. Dies ist hilfreich, wenn der Scanner oder Drucker über eine langsame Schnittstelle, z. B. USB1.1, oder über ein Netzwerk mit dem Computer verbunden ist. • Bildverarbeitungs-Einstellungen (Image Processing Settings) Klicken Sie auf (Plus), um Folgendes festzulegen.
Die folgenden Dokumenttypen werden möglicherweise nicht ordnungsgemäß korrigiert, da der Text nicht ordnungsgemäß erkannt werden kann.
Windows 7: Ordner Eigene Dateien (My Documents) Windows Vista: Ordner Dokumente (Documents) Windows XP: Ordner Eigene Dateien (My Documents) Wichtig Wenn das Dialogfeld Einstellungen über My Image Garden geöffnet wird, wird diese Option nicht angezeigt. • Scanergebnisse prüfen (Check scan results) Zeigt das Dialogfeld Speichereinstellungen (Save Settings) nach dem Scannen an.
Dialogfenster "Einstellungen (Benutzerdefiniert scannen)" Klicken Sie auf der Registerkarte (Scannen über den Computer) auf Benutzerdefiniert scannen (Custom Scan), um das Dialogfeld Einstellungen (Benutzerdefiniert scannen) (Settings (Custom Scan)) anzuzeigen. Im Dialogfeld Einstellungen (Benutzerdefiniert scannen) (Settings (Custom Scan)) können Sie erweiterte Einstellungen für das Scannen mit Ihren bevorzugten Einstellungen festlegen.
Legen Sie zum Scannen der folgenden Objekttypen den Typ oder die Größe des Objekts fest. Folgende Objekte können mit Automatisch (Auto) nicht ordnungsgemäß gescannt werden. Fotos im Format A4 Textdokumente, die kleiner als 2L (127 mm x 178 mm) (5 Zoll x 7 Zoll) sind, z. B. Taschenbuchseiten, deren Buchrücken abgeschnitten ist Objekte, die auf dünnem weißem Papier gedruckt sind Lange, schmale Objekte, z. B.
Dies wird angezeigt, wenn Sie ADF oder Automatisch (Auto) für Quelle wählen (Select Source) auswählen. Klicken Sie zum Anzeigen des Dialogfensters Einstell. Dokumentenscanausrichtung (Document Scan Orientation Settings), in dem Sie die Ausrichtung und die Bindungsseite der über den ADF zu scannenden Dokumente einstellen können. Wichtig Bindungsseite (Binding Side) kann nicht angegeben werden, wenn nur die Vorderseite eines Dokuments gescannt wird.
• Automatische Dokumentkorrektur anwenden (Apply Auto Document Fix) Aktivieren Sie dieses Kontrollkästchen, um den Text in einem Dokument oder Magazin zu schärfen und dadurch besser lesbar zu machen. Wichtig Ist nur verfügbar, wenn das Kontrollkästchen Gescannte Bilder beim Übertragen komprimieren (Compress scanned images upon transfer) nicht aktiviert ist. Der Farbton kann aufgrund der Korrekturen von dem des Originalbilds abweichen. Deaktivieren Sie in diesem Fall das Kontrollkästchen und scannen Sie.
• Ausrichtung von Textdokumenten erkennen und Bilder drehen (Detect the orientation of text document and rotate image) Erkennt die Ausrichtung des Texts im gescannten Dokument und dreht das Bild in die richtige Ausrichtung. Wichtig Es werden nur Textdokumente in den Sprachen unterstützt, die unter Sprache des Dokuments (Document Language) im Dialogfeld Einstellungen (Allgemeine Einstellungen) (Settings (General Settings)) ausgewählt werden können.
Wenn das Dialogfeld Einstellungen über My Image Garden geöffnet wird, wird diese Option nicht angezeigt. • Scanergebnisse prüfen (Check scan results) Zeigt das Dialogfeld Speichereinstellungen (Save Settings) nach dem Scannen an. Dialogfenster "Speichereinstellungen" Wichtig Wird nicht angezeigt, wenn Quelle wählen (Select Source) auf Automatisch (Auto) gesetzt ist. Wenn das Dialogfeld Einstellungen über My Image Garden geöffnet wird, wird diese Option nicht angezeigt.
Dialogfenster "Einstellungen (Scannen und zusammenfügen)" Klicken Sie auf der Registerkarte (Scannen über den Computer) auf Scannen und zusammenfügen (Scan and Stitch), um das Dialogfeld Einstellungen (Scannen und zusammenfügen) (Settings (Scan and Stitch)) anzuzeigen. Im Dialogfeld Einstellungen (Scannen und zusammenfügen) (Settings (Scan and Stitch)) können Sie erweiterte Einstellungen für das Scannen von Objekten festlegen, die größer als die Auflagefläche sind.
Wählen Sie die Auflösung des zu scannenden Objekts aus. Je höher der Wert für die Auflösung, desto detailreicher ist das Bild. Auflösung • Bildverarbeitungs-Einstellungen (Image Processing Settings) Klicken Sie auf (Plus), um Folgendes festzulegen. Die verfügbaren Einstellungselemente hängen von der Option Quelle wählen (Select Source) ab.
Wenn das Dialogfeld Einstellungen über My Image Garden geöffnet wird, wird diese Option nicht angezeigt. • Scanergebnisse prüfen (Check scan results) Zeigt das Dialogfeld Speichereinstellungen (Save Settings) nach dem Scannen an. Dialogfenster "Speichereinstellungen" Wichtig Wenn das Dialogfeld Einstellungen über My Image Garden geöffnet wird, wird diese Option nicht angezeigt.
Dialogfenster "Einstellungen (ScanGear)" Klicken Sie auf der Registerkarte (Scannen über den Computer) auf ScanGear, um das Dialogfeld Einstellungen (ScanGear) (Settings (ScanGear)) anzuzeigen. Im Dialogfeld Einstellungen (ScanGear) (Settings (ScanGear)) können Sie angeben, wie Bilder beim Scannen mit ScanGear (Scanner-Treiber) gespeichert werden sollen und das Verhalten nach dem Scannen festlegen.
Klicken Sie auf die Schaltfläche, um das Dialogfeld Datenformateinstellungen (Data Format Settings) anzuzeigen, in dem Sie die Qualität der zu speichernden Bilder, die Schlüsselwortsuche für PDF-Dateien und ihren Komprimierungstyp sowie das Datenformat für das Speichern von automatisch gescannten Bildern festlegen können. Dialogfenster "Datenformateinstellungen" • Speichern in (Save in) Zeigt den Ordner an, in dem die gescannten Bilder gespeichert werden sollen.
Sie können die Anwendung über das Pull-Down-Menü angeben. • Keine Anwendung starten (Do not start any application) Das Speichern erfolgt in dem unter Speichern in (Save in) angegebenen Ordner. Hinweis Geben Sie die Anwendung oder den Ordner im Dialogfeld Anwendung auswählen (Select Application) oder Speicherort auswählen (Select Destination Folder) an, das Sie durch Auswählen von Hinzufügen... (Add...) im Pull-Down-Menü anzeigen können. • Anweisungen (Instructions) Öffnet dieses Handbuch.
Dialogfenster "Einstellungen (Auf PC speichern (automatisch))" Klicken Sie auf der Registerkarte (Scannen über das Bedienfeld) auf Auf PC speichern (automatisch) (Save to PC (Auto)), um das Dialogfenster Einstellungen (Auf PC speichern (automatisch)) (Settings (Save to PC (Auto))) anzuzeigen.
• Bildverarbeitungs-Einstellungen (Image Processing Settings) Klicken Sie auf (Plus), um Folgendes festzulegen. • Empfohlene Bildkorrektur übernehmen (Apply recommended image correction) Wendet für jeden Objekttyp automatisch die geeigneten Korrekturen an. Wichtig Der Farbton kann aufgrund der Korrekturen von dem des Originalbilds abweichen. Deaktivieren Sie in diesem Fall das Kontrollkästchen und scannen Sie. Hinweis Der Scan-Vorgang dauert länger als gewöhnlich, wenn Sie diese Funktion aktivieren.
Wählen Sie die Option aus, wenn Sie die gescannten Bilder verbessern oder korrigieren möchten. Sie können die Anwendung über das Pull-Down-Menü angeben. • An Anwendung senden (Send to an application) Wählen Sie diese Option aus, wenn Sie die gescannten Bilder unverändert in einer Anwendung verwenden möchten, in der Sie die Bilder durchsuchen oder organisieren können. Sie können die Anwendung über das Pull-Down-Menü angeben.
Dialogfenster "Einstellungen (Auf PC speichern (Foto))" Klicken Sie auf der Registerkarte (Scannen über das Bedienfeld) auf Auf PC speichern (Foto) (Save to PC (Photo)), um das Dialogfenster Einstellungen (Auf PC speichern (Foto)) (Settings (Save to PC (Photo))) anzuzeigen. Im Dialogfeld Einstellungen (Auf PC speichern (Foto)) (Settings (Save to PC (Photo))) können Sie das Verhalten für das Speichern von Bildern als Fotos auf dem Computer festlegen, nachdem diese über das Bedienfeld gescannt wurden.
(2) Bereich Speichereinstellungen • Dateiname (File Name) Geben Sie den Dateinamen des zu speichernden Bilds ein. Wenn Sie eine Datei speichern, werden das Datum und 4 Ziffern im Format "_20XX0101_0001" angehängt. • Datenformat (Data Format) Wird über das Bedienfeld festgelegt. • Einst... (Settings...
Dialogfenster "Einstellungen (Auf PC speichern (Dokument))" Klicken Sie auf der Registerkarte (Scannen über das Bedienfeld) auf Auf PC speichern (Dokument) (Save to PC (Document)), um das Dialogfenster Einstellungen (Auf PC speichern (Dokument)) (Settings (Save to PC (Document))) anzuzeigen.
• Gescannte Bilder beim Übertragen komprimieren (Compress scanned images upon transfer) Komprimiert gescannte Bilder beim Übertragen auf einen Computer. Dies ist hilfreich, wenn der Scanner oder Drucker über eine langsame Schnittstelle, z. B. USB1.1, oder über ein Netzwerk mit dem Computer verbunden ist. • Bildverarbeitungs-Einstellungen (Image Processing Settings) Klicken Sie auf (Plus), um Folgendes festzulegen.
Dokumente, die sowohl vertikalen als auch horizontalen Text enthalten Dokumente mit extrem großen oder kleinen Schriftarten Dokumente mit wenig Text Dokumente, die Abbildungen/Bilder enthalten Handschriftlicher Text Dokumente, die sowohl vertikale als auch horizontale Zeilen (Tabellen) enthalten Hinweis Das Scannen dauert länger als gewöhnlich, wenn Sie Schräge Textdokumente korrigieren (Correct slanted text document) aktivieren.
• An Ordner senden (Send to a folder) Wählen Sie diese Option aus, wenn Sie die gescannten Bilder ebenfalls in einem anderen Ordner als dem unter Speichern in (Save in) angegebenen Ordner speichern möchten. Sie können den Ordner über das Pull-Down-Menü angeben. • Keine Anwendung starten (Do not start any application) Das Speichern erfolgt in dem unter Speichern in (Save in) angegebenen Ordner.
Dialogfenster "Einstellungen (Allgemeine Einstellungen)" Klicken Sie auf die Registerkarte (Allgemeine Einstellungen), um das Dialogfeld Einstellungen (Allgemeine Einstellungen) (Settings (General Settings)) anzuzeigen.
Zeigt den Ordner an, in dem Bilder temporär gespeichert werden sollen. Klicken Sie auf Durchsuchen... (Browse...), um den Zielordner festzulegen. • Anweisungen (Instructions) Öffnet dieses Handbuch. • Standard (Defaults) Sie können die Einstellungen im angezeigten Bildschirm auf die Standardeinstellungen zurücksetzen.
Dialogfenster "Datenformateinstellungen" Zeigen Sie mithilfe einer der folgenden Methoden das Dialogfeld Datenformateinstellungen (Data Format Settings) an. • Klicken auf Einstellungen... (Settings...) unter Speichereinstellungen (Save Settings) auf jeder Registerkarte des Dialogfelds Einstellungen • Klicken auf Einstellungen... (Settings...
• Format für Elemente, die bei automatischem Scannen als Dokument erkannt werden (Format for Item Detected as Document in Auto Scan) Sie können das Datenformat für das automatische Speichern von Objekten festlegen, die beim automatischen Scannen als Dokumente erkannt wurden.
Dialogfenster "Speichereinstellungen" Aktivieren Sie das Kontrollkästchen Scanergebnisse prüfen (Check scan results) unter Speichereinstellungen (Save Settings) im Dialogfeld Einstellungen, um nach dem Scannen das Dialogfeld Speichereinstellungen (Save Settings) anzuzeigen. Sie können das Datenformat und das Ziel festlegen, während Sie sich die Scanergebnisse in Miniaturansicht ansehen.
(3) Bereich Speichereinstellungen • Dateiname (File Name) Geben Sie den Dateinamen des zu speichernden Bilds ein. Wenn Sie eine Datei speichern, werden das Datum und 4 Ziffern im Format "_20XX0101_0001" angehängt. • Datenformat (Data Format) Wählen Sie das Datenformat, in dem die gescannten Bilder gespeichert werden sollen. Sie können JPEG/Exif, TIFF, PNG, PDF oder PDF (Mehrere Seiten) (PDF (Multiple Pages)) auswählen.
Fenster "Bild zusammenfügen" Klicken Sie im Hauptbildschirm von IJ Scan Utility auf Zusammenf. (Stitch), um das Fenster Bild zusammenfügen (Image Stitch) anzuzeigen. Sie können die rechten und linken Hälften eines Objekts, das größer als die Auflagefläche ist, scannen und die gescannten Bilder anschließend zu einem Bild zusammenfügen. Sie können Objekte scannen, die etwa doppelt so groß wie die Auflagefläche sind.
Zeigt das erste gescannte Bild auf der linken Seite an. • Von rechts scannen (Scan from Right) Zeigt das erste gescannte Bild auf der rechten Seite an. • Scanbild 1 (Scan Image 1) • Scannen von Bild 1 beginnen (Start Scanning Image 1) Scannt das erste Objekt. • Scanbild 2 (Scan Image 2) • Scannen von Bild 2 beginnen (Start Scanning Image 2) Scannt das zweite Objekt. • Schnittrahmen anpassen (Adjust cropping frames) Sie können den Scan-Bereich in der Vorschau anpassen.
• Speichern (Save) Speichert die beiden gescannten Bilder als ein Bild. • Abbrechen (Cancel) Bricht das Scannen mit der Einstellung Zusammenf. (Stitch) ab. (2) Symbolleiste • Symbolleiste Sie können die gespeicherten Bilder löschen oder die in der Vorschau angezeigten Bilder anpassen. • (Löschen) Löscht das gescannte Bild. • (Vergrößern/Verkleinern) Vergrößert bzw. verkleinert das Vorschaubild. Klicken Sie mit der linken Maustaste in den Vorschaubereich, um das angezeigte Bild zu vergrößern.
• Nach dem Scannen des ersten Objekts durch Klicken auf Scannen von Bild 1 beginnen (Start Scanning Image 1) Das Bild wird in der unter Scanrichtung (Scan Direction) festgelegten Richtung gescannt, und 2 wird neben dem Bild angezeigt. • Nach dem Scannen des zweiten Objekts durch Klicken auf Scannen von Bild 2 beginnen (Start Scanning Image 2) Die beiden gescannten Bilder werden angezeigt.
Scannen mit der verwendeten Anwendungssoftware (ScanGear) Was ist ScanGear (Scanner-Treiber)? Mit den erweiterten Einstellungen von ScanGear (Scanner-Treiber) scannen ScanGear (Scanner-Treiber) starten Im Basismodus scannen Im erweiterten Modus scannen Scannen mehrerer Dokumente im erweiterten Modus mit dem automatischen Dokumenteneinzug (Auto Document Feeder, ADF) Mehrere Dokumente gleichzeitig mit ScanGear (Scanner-Treiber) scannen Mit ScanGear (Scanner-Treiber) Bilder korrigieren und Farben anpassen Bild
Was ist ScanGear (Scanner-Treiber)? ScanGear (Scanner-Treiber) ist Software, die zum Scannen von Dokumenten benötigt wird. Mit dieser Software können Sie vor dem Scannen von Dokumenten das Ausgabeformat festlegen und Bildkorrekturen vornehmen. ScanGear kann über My Image Garden oder IJ Scan Utility gestartet werden. Die Software kann ebenfalls von anderen Anwendungen aus gestartet werden, sofern diese mit der Standardschnittstelle TWAIN kompatibel sind. (ScanGear ist ein TWAIN-kompatibler Treiber.
Mit den erweiterten Einstellungen von ScanGear (ScannerTreiber) scannen ScanGear (Scanner-Treiber) starten ScanGear (Scanner-Treiber) starten Dokumente nach einfachen Bildkorrekturen scannen Im Basismodus scannen Dokumente nach komplexeren Bildkorrekturen und Helligkeits-/Farbanpassungen scannen Im erweiterten Modus scannen Scannen mehrerer Dokumente mit dem ADF (automatischer Dokumenteneinzug) nach Bildkorrekturen und Helligkeits-/Farbanpassungen Scannen mehrerer Dokumente im erweiterten Modus mit dem auto
ScanGear (Scanner-Treiber) starten Verwenden Sie ScanGear (Scanner-Treiber), um beim Scannen Bild- und Farbkorrekturen vorzunehmen. ScanGear kann über My Image Garden oder andere Anwendungen gestartet werden. Hinweis Richten Sie die Netzwerkumgebung ein, wenn Sie über mehrere Scanner verfügen oder ein netzwerkfähiges Modell besitzen und den Verbindungstyp von einer USB- in eine Netzwerkverbindung geändert haben.
Im Basismodus scannen Verwenden Sie die Registerkarte Basismodus (Basic Mode), um mit einer einfachen Methode zu scannen, indem Sie die Anweisungen auf dem Bildschirm befolgen. Informationen zum gleichzeitigen Scannen mehrerer Dokumente über die Auflagefläche finden Sie unter "Mehrere Dokumente gleichzeitig mit ScanGear (Scanner-Treiber) scannen". Beim Scannen mit dem ADF (automatischer Dokumenteneinzug) werden die Dokumente ohne Vorschau gescannt.
Hinweis Um Zeitschriften mit vielen Farbfotos zu scannen, wählen Sie Zeitschrift (Farbe) (Magazine (Color)). Wenn Sie ein Modell mit Auto-Duplex-ADF verwenden, können Sie unter ADF Duplex Papierausgabe-Einstellungen (ADF Duplex Paper Output Settings) auf der Registerkarte Scannen (Scan) im Dialogfeld Voreinstellungen (Preferences) festlegen, wie das Papier nach dem Scannen beider Seiten vom ADF ausgegeben werden soll. Registerkarte Scannen 3. Klicken Sie auf Vorschau (Preview).
Hinweis Klicken Sie auf (Information), um das Dialogfeld zu öffnen, in dem Sie die aktuellen Scaneinstellungen (Dokumenttyp usw.) überprüfen können. Im Dialogfeld Voreinstellungen (Preferences) kann auf der Registerkarte Scannen (Scan) unter Status des ScanGear-Dialogfelds nach dem Scannen (Status of ScanGear dialog after scanning) ein Vorgang von ScanGear nach dem Scannen angegeben werden.
Im erweiterten Modus scannen Auf der Registerkarte Erweiterter Modus (Advanced Mode) können Sie den Farbmodus, die Ausgabeauflösung, die Helligkeit, den Farbton usw. für den Scan-Vorgang einstellen. Weitere Informationen über das Scannen mehrerer Dokumente gleichzeitig finden Sie unter "Mehrere Dokumente gleichzeitig mit ScanGear (Scanner-Treiber) scannen".
Eingabe-Einstellungen 4. Klicken Sie auf Vorschau (Preview). Das Vorschaubild wird im Vorschaubereich angezeigt. 5. Legen Sie die Ausgabe-Einstellungen (Output Settings) fest. Ausgabe-Einstellungen 6. Passen Sie bei Bedarf den Schnittrahmen (Scan-Bereich) an, und nehmen Sie Bildund Farbkorrekturen vor. Schnittrahmen anpassen (ScanGear) Bildeinstellungen Schaltflächen für die Farbeinstellung 7. Klicken Sie auf Scannen (Scan). Der Scan-Vorgang wird gestartet.
Scannen mehrerer Dokumente im erweiterten Modus mit dem automatischen Dokumenteneinzug (Auto Document Feeder, ADF) Verwenden Sie die Registerkarte Erweiterter Modus (Advanced Mode), um Bildhelligkeit, -farbton usw. zu ändern und mehrere Dokumente gleichzeitig zu scannen, die sich im ADF (automatischer Dokumenteneinzug) befinden. Wenn Sie ein Modell mit Auto-Duplex-ADF verwenden, können Sie beide Seiten eines Dokuments automatisch über den ADF scannen.
Registerkarte Scannen 4. Legen Sie die Ausgabe-Einstellungen (Output Settings) fest. Ausgabe-Einstellungen 5. Nehmen Sie die erforderlichen Bildkorrekturen und Farbanpassungen vor. Bildeinstellungen Schaltflächen für die Farbeinstellung 6. Klicken Sie auf Scannen (Scan). Der Scan-Vorgang wird gestartet. Hinweis Klicken Sie auf (Information), um das Dialogfeld zu öffnen, in dem Sie die aktuellen Scaneinstellungen (Dokumenttyp usw.) überprüfen können.
Mehrere Dokumente gleichzeitig mit ScanGear (ScannerTreiber) scannen Mit der Registerkarte Basismodus (Basic Mode) und Erweiterter Modus (Advanced Mode) können Sie zwei oder mehr Fotos (kleine Dokumente) auf der Auflagefläche gleichzeitig scannen. In diesem Abschnitt wird erläutert, wie Sie mehrere Dokumente mithilfe der Registerkarte Basismodus (Basic Mode) scannen. Wichtig Um mehrere Dokumente als ein einziges Bild zu scannen, führen Sie den Scan-Vorgang in der Gesamtbildansicht durch.
3. Klicken Sie auf Vorschau (Preview). Im Vorschaubereich werden Miniaturansichten der Vorschaubilder angezeigt. Es werden automatisch Schnittrahmen entsprechend der Dokumentgröße festgelegt. 4. Wählen Sie das Ziel (Destination). 5. Legen Sie das Ausgabeformat (Output Size) dem Zweck entsprechend fest. 6. Passen Sie die Schnittrahmen wie gewünscht an und legen Sie Bildkorrekturen (Image corrections) fest. Hinweis Sie können jedes Bild einzeln korrigieren.
8. Klicken Sie auf Scannen (Scan). Mehrere Dokumente gleichzeitig in der Gesamtbildansicht scannen Führen Sie folgende Schritte aus, wenn die Miniaturansichten in der Vorschau nicht richtig angezeigt werden oder wenn Sie mehrere Dokumente als ein einziges Dokument scannen möchten. Hinweis Die Ausrichtung schräg liegender Dokumente wird in der Gesamtbildansicht nicht korrigiert. 1. Klicken Sie nach der Vorschau der Bilder auf Symbolleiste. (Miniaturansicht) in der Wechseln Sie in die Gesamtbildansicht.
5. Legen Sie die erforderlichen Bildkorrekturen (Image corrections) fest. 6. Klicken Sie auf Scannen (Scan). Die Bereiche, die mit gestrichelten Linien umgeben sind, werden gescannt. Hinweis Im Dialogfeld Voreinstellungen (Preferences) kann auf der Registerkarte Scannen (Scan) unter Status des ScanGear-Dialogfelds nach dem Scannen (Status of ScanGear dialog after scanning) ein Vorgang von ScanGear nach dem Scannen angegeben werden.
Mit ScanGear (Scanner-Treiber) Bilder korrigieren und Farben anpassen Fotos schärfen, Staub und Kratzer reduzieren und verblasste Farben korrigieren Bilder korrigieren (Scharfzeichnen, Staub und Kratzer reduzieren, Farbkorrektur usw.) Vorschau des zu scannenden Bilds anzeigen und den Farbton ändern Farben mithilfe eines Farbmusters anpassen Bilder aufhellen, die mit der Zeit verblasst sind oder einen Farbstich haben Sättigung und Farbbalance anpassen Zu dunkle oder zu helle bzw.
Bilder korrigieren (Scharfzeichnen, Staub und Kratzer reduzieren, Farbkorrektur usw.) Mit den Funktionen unter Bildeinstellungen (Image Settings) auf der Registerkarte Erweiterter Modus (Advanced Mode) von ScanGear (Scanner-Treiber) können Sie beim Scannen von Bildern die Konturen von Motiven verbessern, Staub oder Kratzer reduzieren und verblasste Farben korrigieren. Optionen festlegen Klicken Sie auf das Symbol aus.
Den Durchschein-Effekt in Textdokumenten reduzieren oder die Grundfarbe von Recyclingpapier, Zeitungen usw. beim Scannen von Dokumenten aufhellen Setzen Sie Durchschein-Effekt reduzieren (Reduce Show-through) auf EIN (ON). AUS (OFF) EIN (ON) Die Bildschärfe von leicht unscharfen Bildern erhöhen Setzen Sie die Option Scharfzeichnen (Unsharp Mask) auf EIN (ON). AUS (OFF) EIN (ON) Farbverläufe und Streifen reduzieren Setzen Sie die Option Entrastern (Descreen) auf EIN (ON).
Ohne (None) Mittel (Medium) Fotos korrigieren, die mit der Zeit verblasst sind oder einen Farbstich haben Setzen Sie je nach Grad des Verblassens oder der Stärke des Farbstichs die Option Farbkorrektur (Fading Correction) auf Niedrig (Low), Mittel (Medium) oder Hoch (High). Ohne (None) Mittel (Medium) Körnigkeit reduzieren Setzen Sie je nach Grad der Körnigkeit die Option Bildglättung (Grain Correction) auf Niedrig (Low), Mittel (Medium) oder Hoch (High).
Farben mithilfe eines Farbmusters anpassen Auf der Registerkarte Basismodus (Basic Mode) von ScanGear (Scanner-Treiber) können Sie mit der Farbmusterfunktion Farbänderungen in der Vorschau anzeigen und natürliche Farben reproduzieren. Farbeinstellung Sie können Bilder korrigieren, die mit der Zeit verblasst sind oder einen Farbstich haben. Ein "Farbstich" entsteht, wenn eine Farbe aufgrund der Wetterverhältnisse bei der Aufnahme oder aufgrund starker Umgebungsfarben ein Bild dominiert.
Das Vorschaubild wird in der Mitte angezeigt. Ihre Farbkorrekturen werden dort direkt angezeigt. Im folgenden Beispiel wurde der Blaustich entfernt. Blau (Blue) und Grün (Green) sind überbetont. Klicken Sie deshalb auf die Pfeile Gelb (Yellow) und Magenta, um die Farben zu korrigieren. Vorher Nachher Hinweis Farbanpassungen werden nur auf die Schnittrahmen (Scan-Bereiche) oder das in der Miniaturansicht ausgewählte Bild angewandt.
Sättigung und Farbbalance anpassen Klicken Sie auf der Registerkarte Erweiterter Modus (Advanced Mode) von ScanGear (Scanner-Treiber) auf (Sättigung/Farbbalance). Hinweis Klicken Sie auf Standard (Defaults), um alle Anpassungen im aktuellen Fenster rückgängig zu machen. Sättigung Passen Sie die Sättigung bzw. Leuchtkraft der Farben an. Sie können z. B. Farben aufhellen, die mit der Zeit verblasst sind.
Bewegen Sie den Regler unter Farbbalance (Color Balance) nach links bzw. nach rechts, um die entsprechende Farbe hervorzuheben. Cyan und Rot Magenta und Grün Gelb und Blau Hierbei handelt es sich um komplementäre Farbpaare (bei Mischung der einzelnen Farbpaare werden verschiedene Grautönen erzeugt). Sie können die natürliche Farbe reproduzieren, indem Sie die Farbe verringern, die den Stich hervorruft, und die Komplementärfarbe verstärken.
Helligkeit und Kontrast anpassen Klicken Sie auf der Registerkarte Erweiterter Modus (Advanced Mode) von ScanGear (Scanner-Treiber) auf (Helligkeit/Kontrast). Hinweis Klicken Sie auf (Abwärtspfeil), um zur Detailansicht zu wechseln. Klicken Sie auf (Aufwärtspfeil), um zur vorherigen Ansicht zurückzukehren. Klicken Sie auf Standard (Defaults), um alle Anpassungen im aktuellen Fenster rückgängig zu machen.
Helligkeit unter Helligkeit (Brightness) nach links, Passen Sie die Bildhelligkeit an. Verschieben Sie den Regler um ein dunkleres Bild zu erhalten, und nach rechts, um ein helleres Bild zu erhalten. Sie können auch einen Wert eingeben (-127 bis 127). Helligkeit verringert Originalbild Helligkeit erhöht Hinweis Wenn Sie die Helligkeit zu stark erhöhen, können Spitzlichter verloren gehen, und wenn Sie sie zu stark verringern, können Schatten verloren gehen.
Histogramm anpassen Klicken Sie auf der Registerkarte Erweiterter Modus (Advanced Mode) von ScanGear (Scanner-Treiber) auf (Histogramm). Hinweis Klicken Sie auf Standard (Defaults), um alle Anpassungen im aktuellen Fenster rückgängig zu machen. Kanal Jeder einzelne Bildpunkt setzt sich in verschiedenen Anteilen aus den Farben Rot, Grün und Blau zusammen (Farbverlauf). Diese Farben können individuell als "Kanal" angepasst werden. • Hauptkanal (Master) Passen Sie Rot, Grün und Blau an.
(1) Heller Bereich Es sind mehr Daten auf den Spitzlichtbereich verteilt. (2) Dunkler Bereich Es sind mehr Daten auf den Schattenbereich verteilt. (3) Gesamtbild Die Daten sind weit zwischen dem Spitzlichter- und dem Schattenbereich verteilt. Histogramme anpassen (über den Regler) Wählen Sie einen Farbkanal (Channel) aus und verschieben Sie dann (Schwarzpunkt-Regler) oder (Weißpunkt-Regler), um festzulegen, welche Stufe als Schatten bzw. Spitzlicht festgelegt werden soll.
Den Mittelpunkt-Regler verschieben Verschieben Sie den Mittelpunkt-Regler, um die Stufe zu bestimmen, die als Mitte des Farbtonbereichs festgelegt werden soll. Bilder, bei denen mehr Daten auf den Spitzlichtbereich verteilt sind Verschieben Sie den Mittelpunkt-Regler in Richtung des Spitzlichtbereichs. Bilder, bei denen mehr Daten auf den Schattenbereich verteilt sind Verschieben Sie den Mittelpunkt-Regler in Richtung des Schattenbereichs.
Farbtonkurve anpassen Klicken Sie auf der Registerkarte Erweiterter Modus (Advanced Mode) von ScanGear (Scanner-Treiber) auf (Farbtonkurve - Einstellungen). Hinweis Klicken Sie auf Standard (Defaults), um alle Anpassungen im aktuellen Fenster rückgängig zu machen. Kanal Jeder einzelne Bildpunkt setzt sich in verschiedenen Anteilen aus den Farben Rot, Grün und Blau zusammen (Farbverlauf). Diese Farben können individuell als "Kanal" angepasst werden. • Hauptkanal (Master) Passen Sie Rot, Grün und Blau an.
Farbtonkurve anpassen Wählen Sie unter Farbtonkurve auswählen (Select Tone Curve) eine Farbtonkurve aus den folgenden Optionen aus: Keine Korrektur (No correction), Überbelichtung (Overexposure), Unterbelichtung (Underexposure), Starker Kontrast (High contrast), Negativ-/Positiv-Bild umkehren (Reverse the negative/positive image) und Benutzerdefinierte Kurve bearbeiten (Edit custom curve).
Benutzerdefinierte Kurve bearbeiten (Edit custom curve) Sie können bestimmte Punkte auf der Farbtonkurve verschieben und somit die Helligkeit der entsprechenden Bereiche beliebig anpassen.
Grenzwert einstellen Die Helligkeit von Farb- und Graustufenbildern wird als Wert zwischen 0 und 255 ausgedrückt. Beim Erstellen von Schwarzweißbildern hingegen werden alle Farben dem Wert für Schwarz (0) oder dem Wert für Weiß (255) zugeordnet. "Grenzwert" ist der Wert, der festlegt, ob eine Farbe als Schwarz oder als Weiß angesehen wird. Durch Anpassen des Grenzwerts können Sie eine schärfere Darstellung von Text in Dokumenten erreichen oder ein Durchscheinen bei Zeitungen verhindern.
Bildschirme von ScanGear (Scanner-Treiber) Registerkarte Basismodus Registerkarte Erweiterter Modus Eingabe-Einstellungen Ausgabe-Einstellungen Bildeinstellungen Schaltflächen für die Farbeinstellung Dialogfeld Voreinstellungen Registerkarte Scanner Registerkarte Vorschau Registerkarte Scannen Registerkarte Farbeinstellung
Registerkarte Basismodus In diesem Modus können Sie ganz einfach scannen, indem Sie die Anweisungen auf dem Bildschirm befolgen. In diesem Abschnitt werden die auf der Registerkarte Basismodus (Basic Mode) verfügbaren Einstellungen und Funktionen beschrieben. Beim Scannen mit dem ADF (automatischer Dokumenteneinzug) werden die Dokumente ohne Vorschau gescannt.
• Dokument (Graustufen) ADF Duplex (Document (Grayscale) ADF Duplex) (nur Modelle mit Auto-Duplex-ADF) Scannt Dokumente mit dem ADF beidseitig in Schwarzweiß. Die Dokumente werden im Format zum Binden an der Längsseite gescannt, wobei das in den ADF eingelegte Ende die Oberkante bildet. Wichtig Einige Programme bieten keine Unterstützung für das kontinuierliche Scannen mit dem ADF. Weitere Informationen hierzu finden Sie im Handbuch der Anwendung.
In Miniaturansicht Ziehen Sie die Maus über eine Miniaturansicht, um einen Schnittrahmen anzuzeigen. Wenn ein Schnittrahmen angezeigt wird, wird der Bildteil innerhalb des Rahmens gescannt. Wenn kein Schnittrahmen angezeigt wird, wird jedes Bild einzeln gescannt. In Gesamtbildansicht Wird kein Schnittrahmen angezeigt, wird der gesamte Vorschaubereich gescannt. Wenn ein Schnittrahmen angezeigt wird, wird der Bildteil innerhalb des Rahmens gescannt. • Papierformat (L, A4 usw.
Informationen dazu, ob und wie der Schnittrahmen anfangs im Vorschaubild angezeigt wird, finden Sie unter Beschneiderahmen bei Vorschaubildern (Cropping Frame on Previewed Images) in "Registerkarte Vorschau" (Dialogfeld Voreinstellungen (Preferences)). • Seitenverhältnis umkehren (Invert aspect ratio) Ist verfügbar, wenn Ausgabeformat (Output Size) auf eine andere Einstellung als Flexibel (Flexible) gesetzt ist. Klicken Sie auf diese Schaltfläche, um den Schnittrahmen zu drehen.
Hinweis Der Fortschritt des Scan-Vorgangs wird angezeigt. Klicken Sie auf Abbrechen (Cancel), um den Scan-Vorgang abzubrechen. • Voreinstellungen... (Preferences...) Öffnet das Dialogfeld Voreinstellungen (Preferences), in dem Sie Einstellungen für das Scannen/die Vorschau festlegen können. Dialogfeld Voreinstellungen • Schließen (Close) Schließt ScanGear (Scanner-Treiber). (2) Symbolleiste • Symbolleiste Sie können die in der Vorschau angezeigten Bilder anpassen oder drehen.
Wählt die Bilder in der Miniaturansicht aus und versieht sie mit einer blauen Umrandung. • (Alle Schnittrahmen auswählen) Ist verfügbar, wenn mindestens zwei Schnittrahmen festgelegt sind. Ändert die Schnittrahmen in dicke, gestrichelte Linien und wendet die Einstellungen auf alle Schnittrahmen an. • (Schnittrahmen entfernen) Entfernt den ausgewählten Schnittrahmen. • (Informationen) Zeigt die Version von ScanGear und die aktuellen Einstellungen (Dokumenttyp usw.) an.
Wenn in der Symbolleiste (Gesamtbildansicht) angezeigt wird Elemente auf der Auflagefläche werden als ein einziges Bild gescannt und angezeigt. Alle Bereiche in den Schnittrahmen werden gescannt. Hinweis Sie können den Schnittrahmen auf dem angezeigten Bild festlegen. In der Miniaturansicht können Sie nur einen Schnittrahmen pro Bild erstellen. In der Gesamtbildansicht können mehrere Schnittrahmen erstellt werden.
Registerkarte Erweiterter Modus In diesem Modus können Sie erweiterte Scan-Einstellungen festlegen, z. B. den Farbmodus, die Ausgabeauflösung, die Helligkeit und den Farbton. In diesem Abschnitt werden die auf der Registerkarte Erweiterter Modus (Advanced Mode) verfügbaren Einstellungen und Funktionen beschrieben. Beim Scannen mit dem ADF (automatischer Dokumenteneinzug) werden die Dokumente ohne Vorschau gescannt.
Geben Sie einen Wert unter Einstellungsname (Setting Name) ein, und klicken Sie auf Hinzufügen (Add). Der Name wird unter Liste bevorzugter Einstellungen (Favorite Settings List) angezeigt. Wenn Sie auf Speichern (Save) klicken, wird das Element zusammen mit den vordefinierten Elementen in der Liste Bevorzugte Einstellungen (Favorite Settings) angezeigt und kann ausgewählt werden.
Wenn Sie auf die Schaltfläche (Vergrößern/Verkleinern) in der Symbolleiste klicken, wird das Vorschaubild schnell vergrößert. Die Auflösung des angezeigten Bilds ist jedoch niedrig. • Vorschau (Preview) Führt einen Testscan durch. • Scannen (Scan) Startet den Scan-Vorgang. Hinweis Der Fortschritt des Scan-Vorgangs wird angezeigt. Klicken Sie auf Abbrechen (Cancel), um den Scan-Vorgang abzubrechen.
In Gesamtbildansicht • (Miniaturansicht) / (Gesamtbild) Wechselt die Ansicht im Vorschaubereich. Vorschaubereich • (Löschen) Löscht das Vorschaubild aus dem Vorschaubereich. Durch Klicken auf diese Schaltfläche werden auch die Symbolleisten- und Farbeinstellungen zurückgesetzt. • (Beschneiden) Hiermit können Sie den Scan-Bereich durch Ziehen der Maus festlegen.
Ist verfügbar, wenn mindestens zwei Schnittrahmen festgelegt sind. Ändert die Schnittrahmen in dicke, gestrichelte Linien und wendet die Einstellungen auf alle Schnittrahmen an. • (Schnittrahmen entfernen) Entfernt den ausgewählten Schnittrahmen. • (Informationen) Zeigt die Version von ScanGear und die aktuellen Einstellungen (Dokumenttyp usw.) an. • (Handbuch öffnen) Öffnet diese Seite.
Hinweis Sie können den Schnittrahmen auf dem angezeigten Bild festlegen. In der Miniaturansicht können Sie nur einen Schnittrahmen pro Bild erstellen. In der Gesamtbildansicht können mehrere Schnittrahmen erstellt werden.
Eingabe-Einstellungen Unter Eingabe-Einstellungen (Input Settings) können Sie die folgenden Optionen einrichten: • Quelle wählen (Select Source) Der Typ des zu scannenden Dokuments wird angezeigt. Zum Scannen über die Auflagefläche wählen Sie Auflagefläche (Platen), und zum Scannen über den ADF (automatischer Dokumenteneinzug) wählen Sie Dokument (ADF Simplex) (Document (ADF Simplex)) oder Dokument (ADF Duplex) (Document (ADF Duplex)).
• Vorlagenausrichtung (Original Orientation) Legen Sie die Ausrichtung und Heftseite der mit dem ADF zu scannenden Dokumente fest. Klicken Sie auf Einstellungen... (Settings...), um das Dialogfeld Ausrichtung (Orientation) zu öffnen. Wichtig Das Dialogfeld Ausrichtung (Orientation) kann nur geöffnet werden, wenn für Scannen von (Select Source) die Optionen Dokument (ADF Simplex) (Document (ADF Simplex)) oder Dokument (ADF Duplex) (Document (ADF Duplex)) ausgewählt sind.
Beim automatischen Beschneiden in der Gesamtbildansicht wird das Seitenverhältnis nicht beibehalten, da die Größe eine höhere Priorität hat. Unter "Schnittrahmen anpassen (ScanGear)" finden Sie weitere Informationen zu Schnittrahmen.
Ausgabe-Einstellungen Unter Ausgabe-Einstellungen (Output Settings) können Sie die folgenden Optionen einrichten: • Ausgabeauflösung (Output Resolution) Wählen Sie die Auflösung, mit der gescannt werden soll. Je höher der Wert für die Auflösung, desto detailreicher ist das Bild. Wählen Sie aus den nach dem Klicken auf die Schaltfläche angezeigten Optionen eine Auflösung aus oder geben Sie einen Wert (in 1-dpi-Schritten) an.
In Gesamtbildansicht Wird kein Schnittrahmen angezeigt, wird der gesamte Vorschaubereich gescannt. Wenn ein Schnittrahmen angezeigt wird, wird der Bildteil innerhalb des Rahmens gescannt. Hinweis Geben Sie zum Vergrößern/Verkleinern des gescannten Bilds Werte in die Felder (Breite) und (Höhe) im Bereich Ausgabe-Einstellungen (Output Settings) ein, oder geben Sie einen Wert für % an (in 1%-Schritten).
Hinweis Unter "Schnittrahmen anpassen (ScanGear)" finden Sie weitere Informationen zu Schnittrahmen. Informationen dazu, ob und wie der Schnittrahmen anfangs im Vorschaubild angezeigt wird, finden Sie unter Beschneiderahmen bei Vorschaubildern (Cropping Frame on Previewed Images) in "Registerkarte Vorschau" (Dialogfeld Voreinstellungen (Preferences)). • (Seitenverhältnis wechseln) Ist verfügbar, wenn Ausgabeformat (Output Size) auf eine andere Einstellung als Flexibel (Flexible) gesetzt ist.
Bildeinstellungen Wichtig Wenden Sie diese Funktionen nicht auf Bilder ohne Moiré-Effekte, Staub, Kratzer oder verblasste Farben an. Dies könnte sich ungünstig auf den Farbton auswirken. Die Ergebnisse der Bildkorrektur werden möglicherweise nicht im Vorschaubild angezeigt. Hinweis Welche Einstellungen ausgewählt werden können, hängt von den Einstellungen unter Farbmodus (Color Mode) ab. Das Scannen dauert möglicherweise länger als gewöhnlich, wenn Sie Bildeinstellungen (Image Settings) verwenden.
Diese Einstellung kann ausgewählt werden, wenn die Option Empfohlen (Recommended) in der Registerkarte Farbeinstellung (Color Settings) des Dialogfelds Voreinstellungen (Preferences) ausgewählt ist. Hinweis Wenn die Bildanpassung mit der Option Automatisch (Auto) unbefriedigend bleibt, geben Sie den Dokumenttyp an. Der Farbton des Originalbilds kann sich aufgrund der automatischen Bildanpassung ändern. Setzen Sie in diesem Fall die Option Bildanpassung (Image Adjustment) auf Ohne (None).
Es wird empfohlen, diese Einstellung grundsätzlich zu verwenden. • Hoch (High) Wählen Sie diese Option, um kleine und große Staubpartikel und Kratzer zu reduzieren. Dieser Vorgang kann jedoch selbst Spuren im Bild hinterlassen und feinere Bilddetails unkenntlich machen. Wichtig Diese Funktion ist bei bestimmten Fotos möglicherweise nicht wirksam. Hinweis Es wird empfohlen, diese Funktion beim Scannen von gedruckten Materialien auf Ohne (None) zu setzen.
scannen, da die Ergebnisse je nach Art des Dokuments und des darauf ausgeübten Drucks unterschiedlich sein können. Text oder Zeilen, die durch gebogene Seiten unklar oder unscharf erscheinen, werden nicht korrigiert. • Ohne (None) Der Bundstegschatten wird nicht korrigiert. • Niedrig (Low) Wählen Sie diese Einstellung, wenn der Wirkungsgrad der mittleren Einstellung zu stark ist. • Mittel (Medium) Es wird empfohlen, diese Einstellung grundsätzlich zu verwenden.
Schaltflächen für die Farbeinstellung Die Schaltflächen für die Farbeinstellung können für Feinkorrekturen an der Bildhelligkeit und den Farbtönen verwendet werden. Hiermit können Sie die Helligkeit oder den Kontrast des Bilds, seine hellste und dunkelste Stufe (Histogramm) und die Balance (Farbtonkurve) anpassen.
Histogramm anpassen • (Farbtonkurveneinstellungen) Sie können die Helligkeit eines Bildes anpassen, indem Sie die Art der Farbtonkurve auswählen. Dabei handelt es sich um ein Diagramm, das die Balance zwischen Farbeingabe und Farbausgabe erkennen lässt. Sie können Feinanpassungen an der Helligkeit bestimmter Bereiche vornehmen. Farbtonkurve anpassen • (Letzte Prüfung) Mit dieser Funktion können Sie die Farbeinstellungen ein letztes Mal überprüfen.
Geben Sie einen Wert unter Einstellungsname (Setting Name) ein, und klicken Sie auf Hinzufügen (Add). Der Name wird unter Liste mit Farbtonkurveneinstellungen (Tone Curve Settings List) oder Liste mit Grenzwerteinstellungen (Threshold Settings List) angezeigt. Klicken Sie zum Speichern auf Speichern (Save).
Dialogfeld Voreinstellungen Klicken Sie in ScanGear (Scanner-Treiber) auf Voreinstellungen... (Preferences...), um das Dialogfeld Voreinstellungen (Preferences) zu öffnen. Im Dialogfeld Voreinstellungen (Preferences) können Sie erweiterte Einstellungen für ScanGearFunktionen über die Registerkarten Scanner, Vorschau (Preview), Scannen (Scan) und Farbeinstellung (Color Settings) festlegen.
Registerkarte Scanner In der Registerkarte Scanner können Sie die folgenden Einstellungen festlegen. • Geräuscharme Einstellungen (Quiet Settings) Die geräuscharme Funktion senkt den Geräuschpegel dieses Geräts beim Drucken. Verwenden Sie diese Funktion, um die Betriebsgeräusche zu reduzieren, z. B. wenn Sie nachts scannen oder drucken. Klicken Sie auf Einstellungen... (Settings...), um den geräuscharmen Modus festzulegen.
Die Zeitangaben für Startzeit (Start time) und Ende (End time) müssen unterschiedlich sein. • Speicherordner für temporäre Dateien wählen (Select Folder Where Temporary Files are Saved) Zeigt den Ordner an, in dem Bilder temporär gespeichert werden sollen. Klicken Sie auf Durchsuchen... (Browse...), wenn Sie einen anderen Ordner auswählen möchten. • Audioeinstellungen (Sound Settings) Sie können einstellen, dass das Gerät während oder nach Beendigung des Scan-Vorgangs Musik abspielt.
Registerkarte Vorschau In der Registerkarte Vorschau (Preview) können Sie die folgenden Einstellungen festlegen. • Vorschau beim Start von ScanGear (Preview at Start of ScanGear) Wählen Sie eine Option für die Bildvorschau beim Start von ScanGear (Scanner-Treiber). • Vorschau automatisch ausführen (Automatically Execute Preview) Die Vorschau wird beim Start von ScanGear automatisch angezeigt.
• Größer (Larger) Zeigt 105 % (in Breite und Höhe) des für die Standardgröße angezeigten Bereichs an. • Standard Die Standardgröße. • Kleiner (Smaller) Zeigt 95 % (in Breite und Höhe) des für die Standardgröße angezeigten Bereichs an. Hinweis Wenn Sie die Einstellung Beschneidegröße für Miniaturansichten (Cropping Size for Thumbnail View) ändern, werden die Vorschaubilder aktualisiert und auf die neue Größe zugeschnitten.
Registerkarte Scannen In der Registerkarte Scannen (Scan) können Sie die folgenden Einstellungen festlegen. • Status des ScanGear-Dialogfelds nach dem Scannen (Status of ScanGear dialog after scanning) Geben Sie an, was Sie nach dem Scannen von Bildern mit ScanGear (Scanner-Treiber) tun möchten. • ScanGear automatisch schließen (Close ScanGear automatically) Mit dieser Einstellung kehren Sie zur Originalanwendung zurück, nachdem der Scan-Vorgang abgeschlossen ist.
Ausgabe nach Rückseite/Vorderseite (Schnell) (Output by back/front(Fast)) ist beim Scannen in Anwendungen wie OCR-Software festgelegt, die nicht den Bildschirm von ScanGear öffnen. • Ausgabe nach Rückseite/Vorderseite (Schnell) (Output by back/front(Fast)) Diese Option wird bevorzugt, wenn Geschwindigkeit erforderlich ist, da die gescannten Dokumente schnell ausgegeben werden. Allerdings werden die Dokumente nicht in der korrekten Seitenreihenfolge ausgegeben.
Registerkarte Farbeinstellung In der Registerkarte Farbeinstellung (Color Settings) können Sie die folgenden Einstellungen festlegen. • Farbeinstellung Wählen Sie eine der folgenden Optionen. Sie können eine Option auswählen, wenn Farbmodus (Color Mode) auf Farbe (Color) oder Graustufen (Grayscale) eingestellt ist. • Empfohlen (Recommended) Wählen Sie diese Option, wenn ein Dokument auf dem Bildschirm mit kräftigen Farbtönen wiedergeben werden soll.
dem Standardwert in ScanGear übereinstimmt und die Farben des Originalbilds nicht genau auf dem Bildschirm wiedergegeben werden. Klicken Sie auf Standard (Defaults), um den Monitor-Gamma-Wert auf die Vorgabe (2,20) zurückzusetzen. Hinweis Den Gammawert Ihres Bildschirms finden Sie im dazugehörigen Handbuch. Sollte dieser Wert nicht im Handbuch aufgeführt sein, setzen Sie sich mit dem Hersteller in Verbindung.
Objekte platzieren (beim Scannen über den Computer) Im Folgenden wird beschrieben, wie Objekte auf die Auflagefläche oder in den ADF (automatischer Dokumenteneinzug) des Scanners oder Druckers zu legen sind. Platzieren Sie die zu scannenden Objekte entsprechend ihrem Typ ordnungsgemäß auf der Auflagefläche. Anderenfalls werden sie möglicherweise nicht richtig gescannt. Wichtig Legen Sie keine Gegenstände auf dem Vorlagendeckel ab.
Große Objekte (z. B. Fotos im Format A4), die nicht mit einem Abstand zum Rand/Pfeil (Ausrichtungsmarkierung) der Auflagefläche platziert werden können, werden möglicherweise als PDF-Datei gespeichert. Wenn das Objekt nicht im PDF-Format gespeichert werden soll, müssen Sie zunächst das gewünschte Datenformat angeben und dann den Scanvorgang starten. der Startseite des Online-Handbuchs im Abschnitt "Auflegen von Originalen" des entsprechenden Modells.
2. Legen Sie die Dokumente in den ADF und passen Sie die Vorlagenhalter an die Breite der Dokumente an. Schieben Sie das Dokument mit der Schriftseite nach oben ein, bis ein Piepton ertönt. Legen Sie das Dokument mit der Schriftseite nach oben auf, um beide Seiten des Dokuments zu scannen.
Schnittrahmen anpassen (ScanGear) Beim "Zuschneiden" wählen Sie den Bildbereich aus, den Sie beibehalten möchten. Die übrigen Bildbereiche werden beim Scannen verworfen. Sie können auf den Registerkarten Basismodus (Basic Mode) und Erweiterter Modus (Advanced Mode) Schnittrahmen (Scan-Bereiche) auf dem im Vorschaubereich des Bildschirms angezeigten Bild festlegen. Beim Sannen wird jeder Bereich in einem Schnittrahmen als separates Bild gescannt.
Schnittrahmen anpassen Der Mauszeiger ändert sich in (Pfeil), wenn er über einem Schnittrahmen positioniert wird. Wenn Sie dann klicken und den Mauszeiger in die Richtung des Pfeils ziehen, wird der Schnittrahmen entsprechend erweitert oder reduziert. Der Mauszeiger ändert sich in (Fadenkreuz), wenn er in einem Schnittrahmen positioniert wird. Klicken Sie und ziehen Sie die Maus, um den gesamten Schnittrahmen zu verschieben.
Sie können mehrere Schnittrahmen erstellen und für jeden von ihnen unterschiedliche ScanEinstellungen anwenden. Sie können darüber hinaus mehrere Schnittrahmen auswählen, indem Sie auf sie klicken und dabei die Taste Strg gedrückt halten. Wenn Sie mehrere Schnittrahmen auswählen und die Einstellungen auf der Registerkarte auf der rechten Seite von ScanGear ändern, werden die Einstellungen auf alle ausgewählten Schnittrahmen angewendet.
Allgemeine Hinweise (Scanner-Treiber) ScanGear (Scanner-Treiber) unterliegt folgenden Einschränkungen. Berücksichtigen Sie diese bei der Verwendung. Scanner-Treiber-Einschränkungen • Bei Verwendung des NTFS-Dateisystems wird die TWAIN-Datenquelle möglicherweise nicht aufgerufen. Der Grund dafür ist, dass das TWAIN-Modul aus Sicherheitsgründen nicht in den Ordner "winnt" geschrieben werden kann. Wenn Sie Hilfe benötigen, setzen Sie sich mit dem Administrator des Computers in Verbindung.
• Wenn Sie in einer Microsoft Office 2003-Anwendung (z. B. Word, Excel oder PowerPoint) Bilder scannen, deren Größe der ganzen Auflagefläche entspricht, klicken Sie im Bildschirm Grafik von Scanner oder Kamera einfügen (Insert Picture from Scanner or Camera) auf Einfügen anpassen (Custom Insert). Anderenfalls werden die Bilder möglicherweise nicht einwandfrei gescannt. • Wenn Sie Bilder in einer Microsoft Office 2007-/Microsoft Office 2010-Anwendung (z. B.
Hilfreiche Informationen über das Scannen Schnittrahmen anpassen (IJ Scan Utility) Auflösung Datenformate Farbabgleich
Schnittrahmen anpassen (IJ Scan Utility) Beim "Zuschneiden" wählen Sie den Bildbereich aus, den Sie beibehalten möchten. Die übrigen Bildbereiche werden beim Scannen verworfen. Im Fenster Bild zusammenfügen (Image Stitch) können Sie einen Schnittrahmen auf dem im Vorschaubereich angezeigten Bild festlegen.
Auflösung Bei den gescannten Bilddaten handelt es sich um eine Ansammlung von Punkten, die Daten zur Helligkeit und Farbe der Darstellung enthalten. Die Dichte dieser Punkte wird "Auflösung" genannt. Die Auflösung bestimmt, wie viele Detailinformationen in Ihrem Bild enthalten sind. Die Einheit für die Auflösung ist dpi (dots per inch, Punkte pro Zoll). Bei dpi handelt es sich um die Anzahl der Punkte pro Zoll (2,5 cm). Je höher der Auflösungswert, desto detailreicher wird das Bild.
Beeinträchtigungen kommen, z. B. aufgrund von Speichermangel. Legen Sie die mindestens erforderliche Auflösung in Hinblick auf den Verwendungszweck des gescannten Bilds fest. Hinweis Wenn Sie das gescannte Bild beim Drucken vergrößern, legen Sie beim Scannen eine höhere Auflösung fest, als oben empfohlen wird.
Datenformate Sie können beim Speichern von gescannten Bildern ein Datenformat auswählen. Welches Datenformat Sie auswählen sollten, hängt davon ab, wie und mit welcher Anwendung Sie das Bild verwenden möchten. Je nach Anwendung und Betriebssystem (Windows oder Mac OS) stehen unterschiedliche Datenformate zur Verfügung. Nachfolgend finden Sie Informationen zu den verschiedenen Bilddatenformaten. PNG (Standard-Dateierweiterung: .png) Dieses Datenformat wird häufig auf Websites verwendet.
Farbabgleich Beim "Farbabgleich" werden Anpassungen vorgenommen, damit die Farbtöne des Originals mit denen der Bildschirmanzeige und denen des Farbdrucks übereinstimmen. Die Farbtöne werden auf Ihrem Scanner oder Drucker wie unten dargestellt angepasst.
Menü und Einstellungsfenster von IJ Network Scanner Selector EX Mit dem IJ Network Scanner Selector EX können Scanner oder Drucker ausgewählt werden, um über ein Netzwerk vom Computer oder mit dem Bedienfeld zu scannen oder zu drucken. Nach der Installation wird IJ Network Scanner Selector EX im Benachrichtigungsbereich der Taskleiste angezeigt.
Zeigt die Versionsinformationen an. • Beenden (Exit) Beendet IJ Network Scanner Selector EX. (Aktiviert) oder Benachrichtigungsbereich der Taskleiste entfernt. (Deaktiviert) wird aus dem Bildschirm mit den Einstellungen "Scannen von PC" Ihr Scanner oder Drucker muss über IJ Network Scanner Selector EX ausgewählt werden, bevor das Scannen über ein Netzwerk möglich ist. Klicken Sie im Benachrichtigungsbereich der Taskleiste mit der rechten Maustaste auf das Symbol, und wählen Sie dann Einstellungen...
Hier werden die MAC-Adressen der Scanner oder Drucker angezeigt, die über das Netzwerk verwendet werden können. Sie können insgesamt bis zu drei Scanner und Drucker gleichzeitig auswählen. Durch das Auswählen eines Scanners oder Druckers können Scanvorgänge automatisch über das Bedienfeld ausgeführt werden. • Anweisungen (Instructions) Öffnet dieses Handbuch.
Deinstallieren von IJ Network Scanner Selector EX Führen Sie die unten angegebenen Schritte aus, um IJ Network Scanner Selector EX vom Computer zu deinstallieren. Wichtig Nach der Deinstallation von IJ Network Scanner Selector EX kann innerhalb eines Netzwerks nicht gescannt werden. Melden Sie sich mit Administratorrechten am Benutzerkonto an. 1. Deinstallieren Sie IJ Network Scanner Selector EX. • Windows 7 oder Windows Vista: 1.
Weitere Scan-Methoden Scannen mit WIA-Treiber Scannen über die Systemsteuerung (nur Windows XP)
Scannen mit WIA-Treiber Sie können ein Objekt aus einer WIA-kompatiblen (Windows Image Acquisition) Anwendung heraus scannen. WIA ist ein Treibermodell in Windows XP und neueren Betriebssystemversionen. Es ermöglicht Ihnen das Scannen von Objekten ohne die Verwendung einer Anwendung. Das Verfahren ist von der jeweiligen Anwendung abhängig. Folgende Verfahren dienen nur als Beispiele. Weitere Informationen hierzu finden Sie im Handbuch der Anwendung.
• Scanner Der Name des gegenwärtig eingestellten Produkts wird angezeigt. Wenn Sie den Scanner ändern möchten, klicken Sie auf Ändern... (Change...), und wählen Sie das Produkt aus, das Sie verwenden möchten. • Profil (Profile) Wählen Sie entsprechend dem Typ des zu scannenden Objekts die Option Foto (Standard) (Photo (Default)) oder Dokumente (Documents) aus. Sie können ein neues Profil (Profile) speichern, indem Sie Profil hinzufügen... (Add profile...) wählen.
5. Klicken Sie auf Scannen (Scan). Wenn der Scanvorgang abgeschlossen ist, wird das Bild im Anzeigebereich der Anwendung angezeigt. Mit dem WIA-Treiber 1.0 scannen Nachfolgend finden Sie ein Beispiel für das Scannen mit "Paint". 1. Legen Sie das Objekt auf die Auflagefläche oder in den ADF. Objekte platzieren (beim Scannen über den Computer) auf die Option Von Scanner oder Kamera (From scanner 2. Klicken Sie in or camera). (Wählen Sie den Befehl zum Scannen eines Objekts in der Anwendung aus.) 3.
• Helligkeit (Brightness) Stellen Sie die Helligkeit durch Verschieben des Reglers ein. Verschieben Sie ihn nach links, um ein dunkleres Bild zu erhalten, und nach rechts, um ein helleres Bild zu erhalten. Sie können auch einen Wert eingeben (-127 bis 127). • Kontrast (Contrast) Stellen Sie den Kontrast durch Verschieben des Reglers ein. Wenn Sie ihn nach links verschieben, wird der Bildkontrast verringert und das Bild erscheint weicher.
Scannen über die Systemsteuerung (nur Windows XP) Sie können Bilder unter Verwendung des WIA-Treibers über die Systemsteuerung von Windows XP scannen. Wichtig Wenn Sie den Scanner oder Drucker mit einer Netzwerkverbindung verwenden, können Sie nicht mithilfe des WIA-Treibers scannen. 1. Wählen Sie im Menü Start die Option Systemsteuerung (Control Panel). 2.
• Helligkeit (Brightness) Stellen Sie die Helligkeit durch Verschieben des Reglers ein. Verschieben Sie ihn nach links, um ein dunkleres Bild zu erhalten, und nach rechts, um ein helleres Bild zu erhalten. Sie können auch einen Wert eingeben (-127 bis 127). • Kontrast (Contrast) Stellen Sie den Kontrast durch Verschieben des Reglers ein. Wenn Sie ihn nach links verschieben, wird der Bildkontrast verringert und das Bild erscheint weicher.
Objekte platzieren (beim Scannen über den Computer) Im Folgenden wird beschrieben, wie Objekte auf die Auflagefläche oder in den ADF (automatischer Dokumenteneinzug) des Scanners oder Druckers zu legen sind. Platzieren Sie die zu scannenden Objekte entsprechend ihrem Typ ordnungsgemäß auf der Auflagefläche. Anderenfalls werden sie möglicherweise nicht richtig gescannt. Wichtig Legen Sie keine Gegenstände auf dem Vorlagendeckel ab.
Große Objekte (z. B. Fotos im Format A4), die nicht mit einem Abstand zum Rand/Pfeil (Ausrichtungsmarkierung) der Auflagefläche platziert werden können, werden möglicherweise als PDF-Datei gespeichert. Wenn das Objekt nicht im PDF-Format gespeichert werden soll, müssen Sie zunächst das gewünschte Datenformat angeben und dann den Scanvorgang starten. der Startseite des Online-Handbuchs im Abschnitt "Auflegen von Originalen" des entsprechenden Modells.
2. Legen Sie die Dokumente in den ADF und passen Sie die Vorlagenhalter an die Breite der Dokumente an. Schieben Sie das Dokument mit der Schriftseite nach oben ein, bis ein Piepton ertönt. Legen Sie das Dokument mit der Schriftseite nach oben auf, um beide Seiten des Dokuments zu scannen.
Scannen über das Bedienfeld des Geräts Weiterleiten gescannter Daten auf den Computer mithilfe des Bedienfelds am Gerät Grundlagen Speichern von gescannten Daten auf dem USB-Flashlaufwerk über das Bedienfeld am Gerät Vornehmen von Einstellungen über das Bedienfeld am Gerät Netzwerk-Scan-Einstellungen Mit IJ Scan Utility ein Verhalten für Befehle vom Bedienfeld auswählen
Weiterleiten gescannter Daten auf den Computer mithilfe des Bedienfelds am Gerät Sie können mithilfe des Bedienfelds am Gerät die gescannten Daten auf den Computer weiterleiten. Überprüfen Sie vor Weiterleiten gescannter Daten auf den Computer die folgenden Punkte: • Die MP Drivers sind installiert. Wenn die MP Drivers noch nicht installiert sind, legen Sie die Installations-CD-ROM in das Laufwerk des Computers ein, und installieren Sie die MP Drivers.
Wählen Sie bei Weiterleitung der Daten an den über USB angeschlossenen Computer Lokal (USB) (Local (USB)). Wählen Sie bei Weiterleitung der Daten an den über LAN verbundenen Computer den Namen des Computers aus, an den die gescannten Daten weitergeleitet werden sollen. Hinweis Wenn Sie Erneut suchen (Search again) auswählen, beginnt das Gerät erneut mit der Suche nach den angeschlossenen Computern.
Fahren Sie mit Schritt 9 fort, wenn Automatischer Scan (Auto scan) unter Dokumenttyp (Document type) ausgewählt ist. 1. Stellen Sie sicher, dass Scangröße (Scan size) ausgewählt ist, und drücken Sie dann die Taste OK. 2. Drücken Sie die Taste OK. , um die Scangröße auszuwählen, und anschließend die Taste 3. Stellen Sie sicher, dass Datenformat (Data format) ausgewählt ist, und drücken Sie dann die Taste OK. 4. Drücken Sie die Taste OK. , um das Datenformat auszuwählen, und anschließend die Taste 5.
Wenn der Bildschirm für die Programmauswahl angezeigt wird: • Bei Verwendung von Windows 7 oder Windows Vista: Nach dem Drücken der Taste Farbe (Color) oder Schwarz (Black) kann der Bildschirm zur Programmauswahl angezeigt werden. Wählen Sie in diesem Fall Canon IJ Scan Utility, und klicken Sie auf OK. Sie können festlegen, dass My Image Garden immer gestartet wird, wenn die Taste Farbe (Color) oder Schwarz (Black) gedrückt wird.
Speichern von gescannten Daten auf dem USB-Flashlaufwerk über das Bedienfeld am Gerät Sie können gescannte Daten auf dem USB-Flashlaufwerk mithilfe des Bedienfelds am Gerät speichern.
Der Scan-Standby-Bildschirm wird angezeigt, nachdem alle Einstellungen festgelegt wurden. Hinweis Wenn der Bildschirm Scanmenü (Scan menu) angezeigt wird, können Sie das Einstellungselement mit der Taste auswählen. Wenn Sie Kompakt-PDF (Compact PDF) für Datenformat (Data format) auswählen und die Taste OK drücken, wird der Scan-Standby-Bildschirm angezeigt. 7. Legen Sie das Originaldokument auf die Auflagefläche oder in den ADF. Auflegen von Originalen 8.
Vornehmen von Einstellungen über das Bedienfeld am Gerät Sie können Scaneinstellungen wie Scanformat, Auflösung oder Datenformat ändern. Verwenden Sie die Taste Taste OK. , um ein Einstellungselement auszuwählen, und drücken Sie dann die Passen Sie die Einstellungselemente mit der Taste nächste Einstellungselement wird angezeigt. an, und drücken Sie dann die Taste OK. Das Hinweis Das * (Sternchen) auf der LCD-Anzeige weist auf die aktuelle Einstellung hin.
Netzwerk-Scan-Einstellungen Sie können Ihren Scanner oder Drucker mit einem Netzwerk verbinden, damit er von mehreren Computern verwendet werden kann oder Bilder in einen bestimmten Computer gescannt werden können. Wichtig Es können nicht mehrere Benutzer gleichzeitig scannen. Hinweis Konfigurieren Sie zunächst die Netzwerkeinstellungen des Scanners oder Druckers mit der Installations-CD-ROM. Bei einer Netzwerkverbindung dauert der Scanvorgang dauert länger als bei einer USB-Verbindung.
Der Bildschirm mit den Einstellungen "Scannen von PC" wird angezeigt. 3. Wählen Sie Ihren Scanner oder Drucker unter Scanner (Scanners) aus. Normalerweise ist die MAC-Adresse des Scanners oder Druckers nach der Netzwerkeinrichtung bereits ausgewählt. In diesem Fall ist es nicht erforderlich, es erneut auszuwählen. Wichtig Wenn im Netzwerk mehrere Scanner vorhanden sind, werden mehrere Modellnamen angezeigt. In diesem Fall können Sie einen Scanner pro Modell auswählen. 4. Klicken Sie auf OK.
Hinweis Wählen Sie für eine USB-Verbindung "Canon XXX series" (wobei "XXX" für den Modellnamen steht) unter Produktname (Product Name) aus. 3. Klicken Sie auf Einst... (Settings...), um einen anderen Scanner zu verwenden, der in ein Netzwerk eingebunden ist. (Allgemeine Einstellungen), und klicken Sie dann auf 4. Klicken Sie auf Auswählen (Select) unter Produktname (Product Name). Der Bildschirm mit den Einstellungen "Scannen von PC" von IJ Network Scanner Selector EX wird angezeigt.
1. Überprüfen Sie, ob IJ Network Scanner Selector EX ausgeführt wird. Wird IJ Network Scanner Selector EX ausgeführt, wird im Benachrichtigungsbereich der Taskleiste ein entsprechendes Symbol angezeigt. Hinweis Wenn das Symbol nicht im Benachrichtigungsbereich des Taskleiste angezeigt wird, wählen Sie im Menü Start die Option Alle Programme (All Programs) > Canon Utilities > IJ Network Scanner Selector EX > IJ Network Scanner Selector EX aus.
Hinweis Wenn mehrere Scanner mit einem Netzwerk verbunden sind, können Sie bis zu drei Scanner auswählen. 5. Kehren Sie zum Bildschirm mit den Einstellungen "Scannen von PC" zurück und klicken Sie auf OK. Hinweis Wird Ihr Scanner oder Drucker nicht angezeigt, überprüfen Sie folgende Bedingungen, und klicken Sie auf OK, um den Bildschirm zu schließen. Öffnen Sie ihn dann erneut, und versuchen Sie, das Gerät auszuwählen. MP Drivers ist installiert.
Mit IJ Scan Utility ein Verhalten für Befehle vom Bedienfeld auswählen Mit IJ Scan Utility können Sie das Verhalten für das Scannen über das Bedienfeld festlegen. Hinweis Die Bildschirme zum Festlegen des Verhaltens für das automatische Scannen über das Bedienfeld werden in den folgenden Beschreibungen als Beispiele verwendet. 1. Starten Sie IJ Scan Utility. Starten von IJ Scan Utility 2. Klicken Sie auf Einst... (Settings...). Das Dialogfeld Einstellungen wird angezeigt. 3.
Dialogfenster "Einstellungen (Auf PC speichern (Dokument))" 4. Legen Sie Bildkorrekturen unter Scan-Optionen (Scan Options) fest. 5. Geben Sie den Dateinamen und andere Einstellungen unter Speichereinstellungen (Save Settings) an. 6. Wählen Sie Anwendung, die nach dem Scannen gestartet werden soll, unter Anwendungseinstellungen (Application Settings) aus.
7. Klicken Sie auf OK. Die Vorgänge werden gemäß den festgelegten Einstellungen durchgeführt, wenn Sie den Scanvorgang über das Bedienfeld starten.