Operation Manual

Advanced Guide
>
Faxing
> Sending/Receiving Faxes Using the Operation Panel of the Machine >
Using Speed Dial
Utility > Registering Recipients for Speed Dialing Using Speed Dial Utility
Registering Recipients for Speed Dialing Using Speed Dial
Utility
Follow the procedure below to register fax/telephone numbers.
The screens of MX870 series are used for explanation.
Note
Before you register fax/telephone numbers using Speed Dial Utility, make sure that no fax
operations are in progress.
1.
Start up Speed Dial Utility.
Starting Up Speed Dial Utility
2.
Select the machine from the Printer Name list box, then click Display Printer
Settings.
3.
Click TEL Number Registration from Setting Item List.
The list of registered fax/telephone numbers is displayed.
4.
Select an unoccupied code from the list, then click Edit....
The Individual or Group Selection dialog box is displayed.
5.
Click Register individual TEL number or Register group dial, then click Next.
If Register individual TEL number is selected:
1.
Enter the name.
2.
Enter the fax/telephone number.
If Register group dial is selected:
Page 781 of 1086 pagesRegistering Recipients for Speed Dialing Using Speed Dial Utility