Instruction Manual

56 Chapter 3
Printing from a Memory Card
 Removing the Memory Card
1 Open the Card Slot Cover.
2 Ensure that the Access Lamp is not flashing, then remove the memory card.
3 Close the Card Slot Cover.
Printing Photograph
Let’s select a photo from the photos stored on the memory card of the digital camera, and print it.
 Printing Photo Displayed on the LCD (Single-photo print)
Print a photo saved on the memory card.
1 Prepare for printing.
(1) Press [ON/OFF] to turn on the machine.
See “Turning on the Machine” on page 18.
(2) Load paper.
See “Loading Paper” on page 22.
(3) Ensure that the proper paper source is selected.
See “Changing the Paper Source” on page 27.
(4) Insert a memory card into the Card Slot.
See “Inserting the Memory Card” on page 54.
Note
If you use the Card Slot as a memory card drive for your computer, removing operation from
the computer is required before removing the memory card.
z When Windows is being used, right-click the removable disk icon and click [Eject]. If [Eject]
is not displayed on the screen, ensure that the Access Lamp is not flashing and remove
the memory card.
z When Macintosh is being used, be sure to drag the icon into the Trash.
Important
Removing the memory card or turning off the machine while the Access Lamp is flashing can
damage the data stored in the memory card.
Note
Specify [Feed Switch] so that the Auto Sheet Feeder Lamp is lit when feeding paper from the
Auto Sheet Feeder and the Cassette Lamp is lit when feeding paper from the Cassette.