Quick Start Guide
Table Of Contents
- Before Printing
- Printing from Your Computer
- Scanning Images
- Copying
- Printing from a Memory Card
- Photo Printing from Photo or Film
- Printing Photographs Directly from a Compliant Device
- Routine Maintenance
- Troubleshooting
- Error Message Is Displayed on the LCD
- LCD Cannot Be Seen At All
- An Unintended Language Is Displayed on the LCD
- Cannot Install the MP Drivers
- Cannot Connect to Computer Properly
- Print Results Not Satisfactory
- Printing Does Not Start
- Paper Does Not Feed Properly
- Paper Jams
- Error Message Appears on the Screen
- Cannot Print Properly from a Digital Camera
- Cannot Print Properly from a Photo Index Sheet
- Cannot Scan Films
- Appendix
- Safety Precautions
- Index
34 Printing from a Memory Card
Removing the Memory Card
1
Open the Card Slot Cover.
2 Make sure that the Access lamp is not flashing, then remove the memory card.
3 Close the Card Slot Cover.
Printing Photographs Stored on a Memory Card
1
Prepare for printing.
(1) Turn on the machine.
See “Turning the Machine On and Off” on page 4.
(2) Load paper.
See “Loading Printing Paper” on page 8.
(3) Make sure that the proper paper source is selected.
See “Changing the Paper Source” on page 15.
2 Insert the memory card.
(1) Select Memory card on the HOME screen.
See “Basic Operation for the Operation Panel” on page 2.
(2) Insert the memory card into the Card Slot.
See “Inserting the Memory Card” on page 33.
3 Select the print menu.
(1) Select Select and print, then press the OK button.
(2) Confirm the paper size, media type, and other settings, select Next, and then press the
OK button. To change the settings, select the item and press the OK button.
4 Select the photo to print and specify the number of copies for each photo.
(1) Use the Easy-Scroll Wheel or the [ or ] button to display a photo to print.
(2) Use the + or - button to specify the number of copies.
(3) Repeat steps (1) and (2) to specify the number of copies for each photo.
(4) Press the OK button.