Setup Guide

41
Setting Up the Machine and the Computer (Macintosh)
ENGLISH
First-time Setup for Use over Wireless LAN
When you are setting up the machine to be used over wireless LAN (infrastructure mode), follow
these steps to set up the machine and your computer.
1 Confirm that the screen shown on the right
appears.
2 Connect the machine with a USB cable.
Used over a wireless
or wired LAN
To enable to use the machine from
another computer over a LAN
z “Setting Up an Additional Computer to
Use a Machine Already Connected to
a Network” on page 52.
To also enable to use a
USB connection
z “Setting Up for Use
with USB Connection”
on page 49.
Used over a USB
connection
To also enable to use over a wireless
or wired LAN
z “First-time Setup for Use over Wireless
LAN” on page 41.
z “First-time Setup for Use over Wired
LAN” on page 46.
Note
To set up a machine that is not yet connected to a
LAN, connect to it by USB.
How is the machine
currently being used ?
Which connection type do you intend to use ?