Network Setup Troubleshooting

7
ENGLISH
Is the privacy separator feature enabled on the access point?
Disable the privacy separator feature.
Check 5
Check 4
For details on how to change the settings of the access point, refer to the manual supplied with
the access point or contact its manufacturer.
•
For details on how to check the settings of the access point, refer to the manual supplied with the
access point or contact its manufacturer.
•
When obtaining an IP address automatically, make sure that the DHCP function of the
access point is active.
For details on how to check the settings of the access point, refer to the manual supplied with the
access point or contact its manufacturer.
•
Enable the DHCP function of the access point, then click Back (A).
For details on how to change the settings of the access point, refer to the manual supplied with
the access point or contact its manufacturer.
•
Glossary
A function to control trafc to/from specic IP addresses.
IP address ltering•
A function to prevent communication between multiple wireless devices connected to an access point.
Privacy separator feature•
DHCP function•
A function that automatically assigns required information (IP address, etc.) to computers connected to
the Internet.
Check
Check
Other Troubleshooting Tips
The Machine is Not Detected after the Network Environment is
Changed
IP address•
A numerical identication assigned to each computer or network device connected to a network.
Glossary
Wait until the IP address is assigned to the computer. You may need to restart your
computer.
Search for the machine again after conrming a valid IP address is assigned to the computer.•
Forgotten or Do Not Know the Access Point Name/Network Name
(SSID), Security Protocol (encryption standard), and Network Key
Check the access point settings.
For details on how to check the settings of the access point, refer to the manual supplied with the
access point or contact its manufacturer.
•