User Guide

52 Troubleshooting
 Error No.: 1700/1710 Is Displayed
Machine is not connected properly. Make sure that the USB cable is plugged in securely to the computer and the
machine.
z If you are using a relay device such as a USB hub, disconnect it, connect the
machine directly to the computer, and try printing again. If printing starts
normally, there is a problem with the relay device.
Consult the reseller of the relay device for assistance.
z There could also be a problem with the USB cable. Replace the USB cable
and try printing again.
Your machine is not selected in Printer
on the Print dialog box.
Select your machine’s name in Printer on the Print dialog box.
If your machine’s name does not appear in Printer, follow the procedure below
to check that the driver for your machine is installed to your computer.
(1) Select Print & Fax Preferences from Printer.
In Mac OS X v.10.2.8 or 10.3.x, select Edit Printer List from Printer .
(2) Check that your machine’s name is displayed in the list of
printers and that the check box is selected.
In Mac OS X v.10.2.8, check that your machine’s name is displayed in the
Printer List .
(3) If your machine’s name is not displayed, click Add(+) to add
the printer.
If you cannot add the machine, follow the procedure described in your setup
sheet to reinstall the MP Drivers.
Cause Action
The ink absorber is almost full. See “E, 8” in “An Error Code Is Displayed on the LED” on page 37.
Cause Action