User Guide

10 Before Printing
Turning On/Off the Printer
This section describes the method to turn on/off the printer.
 Turning On the Printer
Ensure that the Print Head and ink tank are installed, before turning on the printer.
1 Plug the AC Adapter and connect the other end to a power outlet.
2 Open the Paper Feed Tray and press the
ON/OFF button to turn the printer on.
 Turning Off the Printer
Check the following before turning off the printer.
 The Access lamp of the memory card is not flashing.
 The printer is not operating.
1 Turn off the printer by pressing the ON/OFF button.
The POWER lamp goes out and the power will be
turned off.
Note
If the Print Head and ink tank are not installed, refer to the Easy Setup Instructions (Setup Sheet)
to install them.
Important
Data in the memory card may be damaged if you remove the memory card or turn off the printer
when the Access lamp is flashing.
The POWER lamp flashes then changes to steady
(non-flashing).
The HOME screen appears on the LCD.
Note
If the Alarm lamp is lit orange and an error message
is displayed on the LCD, see “Error Message Is
Displayed on the LCD” in “Troubleshooting” on page
55.
Access lamp
Note
Power cord
 Before unplugging the power cord, turn off
the printer and ensure that the POWER lamp
has gone out. You may not be able to print
afterward if you unplug the power cord when
the POWER lamp is lit or flashing.