Operation Manual

Note
Depending on how the end of the film is cut, the borderlines between frames may not line
up with the white lines on the Film Holder. In such a case, align them by adjusting the film
position.
3. Load the Film Guide to fit in the grooves on the right and left sides on the Platen
Glass.
Note
When a film strip that is shorter than the Film Strip Frame is scanned, portion of an image near
the open area may appear pale. Scan the film strip shield with black paper over the open area.
Labels attached to areas of the film without images may be interpreted as images and will be
included in the scan.
Page top
Page 47 of 1135 pagesLoading the Film Strip