Operation Manual

(1)
Magnif. (Magnification)
Specify the enlargement/reduction manner. You can specify the copy scale by selecting the page size: A4
to A5, A4 to B5, etc. If you do not want to enlarge/reduce the page size, select SameMagnification.
(2)
Intensity
Specify the intensity when you want to make the darkened/lightened copy. Select Auto to automatically
adjust the intensity according to the original.
(3)
Page size
Select the page size of the paper to print: A4, 8.5"x11" (LTR), etc.
(4)
Type (Media type)
Select the media type of the paper to print: Plain paper, Plus Glossy II, etc.
Note
If you do not select the page size and media type correctly, the machine may feed paper
from the wrong paper source or may not print with the proper print quality.
See
Paper Sources to Load Paper
.
(5)
Print qlty (Print quality)
Select the print quality according to the original to copy: Standard, High, etc. The available print quality
settings depend on the paper selected for Type.
(6)
2-sided
Copy a single side of two originals to both sides of a single paper. When 2-sided is selected, touch the right
Function
button to select Advanced and specify the staple side of the print paper.
(7)
Layout
Select the layout: 2-on-1 copy or 4-on-1 copy.
See
Using Various Copy Functions
.
(8)
Orientation
Select the orientation of the original to copy: Portrait or Landscp..
Note
If Two-sided copy is selected or 2-sided is set, select A4 or 8.5"x11" (LTR) for Page size and
Plain paper for Type.
If 2-on-1 copy or 4-on-1 copy is selected, select A4 or 8.5"x11" (LTR) for Page size.
If Borderless copy is selected, select 8.5"x11" (LTR), A4, 4"x6" (10x15cm), or 5"x7"
(13x18cm) for Page size and any types of paper except Plain paper for Type.
If Borderless copy is selected, slight cropping may occur at the edges since the copied image
is enlarged to fill the whole page.
The settings of the page size, media type, print quality, automatic intensity adjustment, etc. are
retained, and these settings will appear next time when Copy is selected even if the power is
turned off and on.
If the combination of some setting items is invalid, the mark appears at the invalid item.
Touch the left
Function
button to select Error details and check the error message, then
correct the settings.
If you select Fast with the media type set to Plain paper and the quality is not as good as
expected, select Standard or High and then try copying again.
Page top
Page 35 of 1135 pagesMaking Copies