Operation Manual

Using Machine with Direct Connection
Direct connection allows you to print or scan by connecting the machine to a device such as a smartphone
or tablet via wireless connection in an environment where a wireless router is not available. In addition, you
can connect the machine to a device without a wireless router even where it is available.
This section describes following operations for direct connection.
• Changing settings of the machine and device and connecting them wirelessly
Preparing for Direct Connection
• Printing/scanning from the device connected to the machine
Printing/Scanning with Direct Connection
• Terminating direct connection and set the machine settings for normal use
Terminating Direct Connection
• Changing the settings for direct connection
Changing Direct Connection Setting
Important
• Before using the machine with the direct connection, check the usage restrictions then switch the
machine to the direct connection.
Restrictions
Preparing for Direct Connection
Change settings below to prepare for direct connection.
• Machine's LAN settings
Changing machine's settings
• Settings of a wireless communication device to connect
Changing settings of a wireless communication device and connecting it to the machine
Changing machine's settings
1. Make sure machine is turned on.
2. Tap icon on upper right of HOME screen.
Ex. When the wireless LAN connection is enabled:
596