User's Manual

If you use this function in combination, select 2-sided for 2-sidedPrintSetting, then select the
orientation and the stapling side of print paper on the Print settings screen.
For details on two-sided copy function:
Two-Sided Copying
When checking the orientation:
When you are using the preview screen, the screen below is displayed before copying starts so that you
can check the orientation.
A. Tap to rotate the original by 180 degrees.
B. Tap to start scanning the original.
C. Tap to rescan the original.
When scanning is finished:
The screen below appears after scanning the first sheet of original.
A. Tap to start scanning the original.
Remove the sheet of original from the platen glass after scanning and load the next sheet on the
platen glass, then tap Scan.
B. Tap to start copying the original already scanned.
Note
• You can add the copying job while printing.
Adding the Copying Job (Reserve copy)
548