Operation Manual

Advanced Guide
>
About Network Communication
>
Changing and Confirming Network Settings
> Printing Out Network
Setting Information
N022
Printing Out Network Setting Information
You can print out the network settings of the machine such as its IP address and SSID.
Important
This print out contains valuable information about your computer. Handle it with care.
1.
Make sure that the machine is turned on.
2.
Load a sheet of A4 or Letter-sized plain paper.
Refer to
Loading Paper / Originals
.
3.
Select
Setup on the HOME screen.
Note
For details on how to select a menu on the HOME screen, refer to
Overview of the Machine
.
4.
Select
Device settings, then use the
OK
button to confirm the selection.
5.
Use the button to select LAN settings, then use the
OK
button to confirm the
selection.
6.
Use the button to select Confirm LAN settings, then use the
OK
button to
confirm the selection.
7.
Use the button to select Print LAN details, then use the
OK
button to confirm the
selection.
8.
Use the button to select Yes, then use the
OK
button to start printing.
The following information on the machine's network setting is printed out.
For MG6100 series/MG8100 series
Item
Explanations of the item Setting
Wireless LAN Wireless LAN
Enable/Disable
Link Status
Status of the Wireless LAN
Active/Inactive
MAC Address
MAC Address
XX:XX:XX:XX:XX:XX
SSID SSID
SSID of the wireless LAN
Connection Mode Connection Mode Infrastructure
Channel Channel
XX (1 to 13)
Encryption
Method of the Encryption none/WEP/TKIP/AES
WEP Key Length WEP Key Length
Inactive/128/64
Authentication
Method of the Authentication none/auto/open/shared/WPA-PSK/WPA2-
PSK
Page 1023 of 1063 pagesPrinting Out Network Setting Information