Operation Manual

A Message Is Displayed
This section describes some of the errors or messages.
Note
• A Support Code (error number) is displayed on the computer or on the LCD for some error or message.
For details on errors with Support Codes, refer to Support Code List.
If a message is displayed on the LCD, see below.
• A Message Is Displayed on the LCD
If a message is displayed on the computer, see below.
• Error Regarding Automatic Duplex Printing Is Displayed
• Error Regarding the Power Cord Being Unplugged Is Displayed
• Writing Error/Output Error/Communication Error
• Other Error Messages
• The Inkjet Printer/Scanner/Fax Extended Survey Program Screen Is Displayed
A Message Is Displayed on the LCD
Confirm the message and take an appropriate action.
• Power was not turned off correctly the last time. Press the button when turning power off.
The power cord may have been unplugged last while the machine was still on.
Press the OK button to dismiss the error.
Note
• See Notice for Unplugging the Power Cord for unplugging the power cord.
• Cannot connect to the server. Please wait a while and try again.
You cannot connect to the server due to some communication error. When you have tried to access a
photo sharing site, it is possible that your photos have been deleted.
Press the OK button to dismiss the error, then try again after a while.
Error Regarding Automatic Duplex Printing Is Displayed
Check
See Cannot Print Properly with Automatic Duplex Printing and take the
appropriate action.
Error Regarding the Power Cord Being Unplugged Is Displayed
The power cord may have been unplugged while the machine was still on.
Check the error message that appears on the computer, then click OK.
The machine starts printing.
See Notice for Unplugging the Power Cord for unplugging the power cord.
815