Operation Manual

Use Your Computer to Print a Nozzle Check Pattern

The nozzle check function allows you to check whether the print head is working properly by printing a

nozzle check pattern. Print the pattern if printing becomes faint, or if a specific color fails to print.

The procedure for printing a nozzle check pattern is as follows:

Nozzle Check

Open the printer driver setup window

Click Nozzle Check on the Maintenance tab

The Nozzle Check dialog box opens.

Click Initial Check Items to display the items that you need to check before printing the nozzle check

pattern.

Load paper in the printer

Load one sheet of A4 size or Letter size plain paper into the cassette.

Note

• If the cassette paper information registered on the printer is not set to A4 size and plain paper,

an error may occur. For instructions on what to do if an error occurs, see "Paper setting for

Printing."

For details about the cassette paper information to be registered on the printer, see the

following:

• Paper Settings on the Printer Driver and the Printer (Media Type)

• Paper Settings on the Printer Driver and the Printer (Paper Size)

Print a nozzle check pattern

Make sure that the printer is on and click Print Check Pattern.

Printing of the nozzle check pattern begins.

Click OK when the confirmation message appears.

The Pattern Check dialog box opens.

5. Check the print result

Check the print result. When the print result is normal, click Exit.

If the print result is smudged or if there are any unprinted sections, click Cleaning to clean the print

head.