Network Setup Troubleshooting
4
Check
Multiple access points with the same name exist. is Displayed
Select Use multiple AccessPoints.
For details on how to check the MAC address of the access
point, refer to the manual supplied with the access point or
contact its manufacturer.
•
Select Use one AccessPoint only, then select the MAC
address of the target access point.
When using multiple access points
Glossary
A unique number assigned to each network device.
MAC address•
For subsequent operations, go to
or
/
/
in "Entering the Access
Point's Wireless LAN Settings Directly on the Machine" on page 11.
•
For subsequent operations, go to
or
/
/
in "Entering the Access Point's Wireless LAN Settings
Directly on the Machine" on page 11.
•
When you have only one access point
The message appears when multiple access points with
the same name are found.
Glossary
DHCP function•
A function to automatically assign required information (IP address, etc.) to computers, printers or other
devices connected to the network.
Check 5
Is TKIP set as an encryption standard when the access point is congured to
communicate using IEEE802.11n standard only?
If the encryption standard of the access point is set to TKIP, IEEE802.11n cannot be
used as a communication standard.
Set the encryption standard to other than TKIP or set the communication standard to
other than IEEE802.11n, then congure wireless LAN settings again.
For details on how to change the settings of the access point, refer to the manual supplied with
the access point or contact its manufacturer.
•