MG5120 series Getting Started

3
F
E
G
H
4 5
4
2 Install the Ink Tanks
1. Remove the orange tape
completely.
2. Remove the protective lm
completely.
Hold the ink tank with the orange protective cap
(E) pointing up while being careful not to block
the L-shape air hole (F).
Hold the ink tank by its sides and slowly twist the orange
protective cap 90 degrees horizontally to remove it off.
Do not push the sides of the ink tank.
Handle the ink tanks carefully. Do not drop or apply excessive pressure to them.
Be sure to use the supplied ink tanks.
If the orange tape remains on the L-shape air hole, ink may splash or the machine may
not print properly.
If you push the sides of the ink tank with the L-shape air hole blocked, ink may splash.
•
•
•
•
Do not touch the inside (G) of the orange protective cap or
the open ink port (H). The ink may stain your hands if you
touch them.
•