Operation Manual

Aligning the Print Head

If printed ruled lines are misaligned or print results are otherwise unsatisfactory, adjust the

print head position.

Note

If the remaining ink level is low, the print head alignment sheet will not be printed

correctly. Replace the FINE cartridge whose ink is low.

Replacing a FINE Cartridge

You need to prepare: a sheet of A4 or Letter-sized plain paper (including

recycled paper)*

* Be sure to use paper that is white and clean on both sides.

1. Make sure that the power is turned on.

2. Load a sheet of A4 or Letter-sized plain paper in the rear tray.

3. Pull out the paper output tray and the output tray extension.

4. Hold down the Stop button until the Alarm lamp flashes orange four

times, then release it immediately.

The print head alignment sheet will be printed.