Quick Start Guide

Cleaning the Print Head

Clean the print head if lines are missing or if horizontal white streaks are present in the

printed nozzle check pattern. Cleaning unclogs the nozzles and restores the print head

condition. Cleaning the print head consumes ink, so clean the print head only when

necessary.

1. Make sure that the power is turned on.

2. Hold down the Stop button until the Alarm lamp flashes orange twice,

then release it immediately.

The machine starts cleaning the print head.

The cleaning will be complete when the ON lamp lights green after flashing.

Do not perform any other operations until the machine completes the cleaning of the

print head. This takes about 30 seconds.

3. Check the print head condition.

To check the print head condition, print the nozzle check pattern.

Printing the Nozzle Check Pattern

Note

If the problem is not resolved after cleaning the print head twice, clean the print head

deeply.

Cleaning the Print Head Deeply