Operation Manual

Orientation
Selects the printing orientation.
If the application used to create your document has a similar function, select the same
orientation that you selected in that application.
Portrait
Prints the document so that its top and bottom positions are unchanged relative to the
paper feed direction. This is the default setting.
Landscape
Prints the document by rotating it 90 degrees relative to the paper feed direction.
You can change the rotation direction by going to the Maintenance tab, opening the
Custom Settings dialog box, and then using Rotate 90 degrees left when orientation
is [Landscape] check box.
To rotate the document 90 degrees to the left when printing, select the Rotate 90
degrees left when orientation is [Landscape] check box.
To rotate the document 90 degrees to the right when printing, clear the Rotate 90
degrees left when orientation is [Landscape] check box.
Print Quality
Selects your desired printing quality.
Select one of the following to set the print quality level that is appropriate for the purpose.
To set the print quality level individually, click the Main tab, and for Print Quality, select
Custom. The Set... becomes enabled. Click Set... to open the Custom dialog box, and then
specify the desired settings.
High
Gives priority to print quality over printing speed.
Standard
Prints with average speed and quality.
Draft
This setting is appropriate for test printing.
Paper Source
Shows the source from which paper is supplied.
Copies
Specifies the number of copies you want to print. You can specify a value from 1 to 999.
355