Operation Manual

Draft
This setting is appropriate for test printing.
Rotate 180 degrees
Prints the document by rotating it 180 degrees against the paper feed direction.
The width of print area and the amount of extension that are configured in other
application software will be reversed vertically and horizontally.
Color/Intensity Manual Adjustment
Select when you set the Color Correction method and individual settings such as
Cyan, Magenta, Yellow, Brightness, Intensity, and Contrast, etc.
Important
Depending on the printing profiles that were selected in Commonly Used Settings,
certain function may be grayed out and you will not be able to change them.
Media Type
Selects a type of printing paper.
Select a media type that matches the paper that is loaded in the printer. This ensures that
printing is carried out properly for the specified paper.
Printer Paper Size
Selects the size of paper actually loaded into the machine.
Normally, the paper size is set automatically according to the output paper size setting, and
the document is printed with no scaling.
When you set 2-on-1 Printing or 4-on-1 Printing in Additional Features, you can
manually set the paper size with Page Size on the Page Setup tab.
If you select a paper size that is smaller than the Page Size, the page image will be
reduced.
If you select a paper size that is larger than the Page Size, the page image will be enlarged.
Custom Paper Size dialog box
This dialog box allows you to specify the size (width and height) of the custom paper.
Units
Select the unit for entering a user-defined paper size.
Paper Size
Specifies the Width and the Height of the custom paper. Measurement is shown
according to the units specified in Units.
354