Extra Information

• If the setting is incorrect:

Reinstall the MP Drivers with the Setup CD-ROM or install them from our website.

• Printing does not start even though the machine is connected to the computer using a USB cable

and the port named "USBnnn" is selected:

In Windows 8, select My Printer on the Start screen to start My Printer. If My Printer is not

displayed on the Start screen, select the Search charm, then search for "My Printer".

Set the correct printer port on Diagnose and Repair Printer. Follow the on-screen instructions to

set the correct printer port, then select your machine's name.

In Windows 7, Windows Vista, or Windows XP, click Start and select All programs, Canon

Utilities, Canon My Printer, Canon My Printer, then select Diagnose and Repair Printer. Follow

the on-screen instructions to set the correct printer port, then select your machine's name.

If the problem is not resolved, reinstall the MP Drivers with the Setup CD-ROM or install them from

our website.

Check3

Make sure that the USB cable is securely plugged in to the machine and the

computer.

When the machine is connected to your computer with a USB cable, check the followings:

•

If you are using a relay device such as a USB hub, disconnect it, connect the machine directly to the

computer, and try printing again. If printing starts normally, there is a problem with the relay device.

Consult the reseller of the relay device for details.

•

There could also be a problem with the USB cable. Replace the USB cable and try printing again.

Check4

Make sure that the MP Drivers are installed correctly.

Uninstall the MP Drivers following the procedure described in Deleting the Unnecessary MP Drivers, then

reinstall the MP Drivers with the Setup CD-ROM or reinstall them from our website.

Check5

Check the status of the device on your computer.

Follow the procedure below to check the status of the device.

Open the Device Manager on your computer as shown below.

If the User Account Control screen is displayed, follow the on-screen instructions.

•

In Windows 8, select Control Panel from the Settings charm on Desktop > Hardware and Sound

> Device Manager.

• In Windows 7 or Windows Vista, click Control Panel, Hardware and Sound, then Device Manager.

•

In Windows XP, click Control Panel, Performance and Maintenance, System, then click Device

Manager on the Hardware sheet.

2. Double-click Universal Serial Bus controllers then USB Printing Support.

If the USB Printing Support Properties screen is not displayed, make sure that the machine is correctly

connected to the computer.

Check3

Make sure that the USB cable is securely plugged in to the machine and the computer.

3. Click the General tab and make sure that there is no indication of a problem with the device.

If a device error is displayed, refer to Windows help to resolve the error.