Operation Manual

Note

•

If the Scan standby screen for forwarding the data to the USB-connected computer is displayed on

the touch screen, tap to display the screen for selecting to which you save the data.

Select the computer to forward the scanned data following the procedure below.

1. Tap PC.

Tap the computer to forward the scanned data.

The Scan standby screen is displayed.

Note

• If you tap Local (USB) on the Select PC screen, the data is forwarded to the USB-connected

computer.

•

When you forward the scanned data to the computer using WSD (one of the network

protocols supported in Windows 8.1, Windows 8, Windows 7, and Windows Vista), select

Enable for WSD scan from this device on WSD setting on Other settings in LAN settings

under Device settings.

WSD setting

If you tap Search again, the machine starts searching for the connected computers again.

3. Specify the settings as necessary.

740