Operation Manual

3. Drag the Intensity slide bar on the Color Adjustment sheet to adjust the intensity.
Check6
Is printing performed beyond the recommended printing area?
If you are printing beyond the recommended printing area of your printing paper, the lower edge of the paper
may become stained with ink.
Resize your original document in your application software.
Printing Area
Check7
Is the paper feed roller dirty?
Clean the paper feed roller.
Cleaning the Paper Feed Rollers from Your Computer
Note
•
Cleaning the paper feed roller will wear the roller, so perform this procedure only when necessary.
Check8
Is the inside of the printer dirty?
When performing duplex printing, the inside of the printer may become stained with ink, causing the printout to
become smudged.
Perform the Bottom Plate Cleaning to clean the inside of the printer.
Cleaning Inside the Printer
Note
•
To prevent the inside of the printer from stains, set the paper size correctly.
Check9
Set the time to dry the printed surface longer.
Doing so gives the printed surface enough time to dry so that paper smudged and scratched are prevented.
1.
Make sure that the printer is turned on.
2.
Open the printer driver setup window.
How to Open the Printer Driver Setup Window
3.
Click the Maintenance tab and then Custom Settings.
4. Drag the Ink Drying Wait Time slide bar to set the wait time, and then click OK.
5. Confirm the message and click OK.
409