iP8500 Quick Start Guide

Advanced Printing
25
• Layout ....................Borderless
• Trimming ................Off (No trimming)
• Image optimize .......On (ExifPrint)
• Date print................Off (No printing)
Additional settings
The settings explained below cannot be made on some cameras. If any setting
cannot be made, the default setting explained above is used.
Names of settings that are displayed on Canon PictBridge-compatible cameras are
used in the description given below. Different names may be displayed on your
camera depending on the brand or model.
For details, refer to your camera’s instruction manual.
About “Paper size” and “Paper type”
To change the paper size or paper type, operate from the camera to select the
PictBridge print setup mode and confirm or check the settings.
By default, 4" x 6" is selected from Paper size and Photo (Photo Paper Plus Glossy) is
selected from Paper type for this printer. To use Photo Paper Pro, select Fast Photo from
Paper type.
If using a Canon PictBridge-compatible camera, you can select 5" x 7" from Paper size.
The following sizes and types of paper can be loaded in the printer by selecting options
from Paper size and Paper type.
When 4" x 6" is selected from Paper size, “2-up”, “4-up”, “9-up”, and “16-up” options
may be available in Layout.
“Paper size” setting “Paper type” setting Paper loaded in printer
10 x 15 cm/4" x 6"
(Default)
Photo (Default) Photo Paper Plus Glossy
Fast Photo Photo Paper Pro
Photo Photo Paper Plus Semi-gloss
Photo Glossy Photo Paper
13 x 18 cm/5" x 7" Photo Photo Paper Plus Glossy
A4/8.5" x 11" (Letter) Photo Photo Paper Plus Glossy
Fast Photo Photo Paper Pro
Photo Photo Paper Plus Semi-gloss
Photo Glossy Photo Paper
5.4 x 8.6 cm/Credit Card Photo Glossy Photo Paper