Easy Setup Instructions

ManualsBrandsCanon ManualsPrinterPIXMA iP6700D

NOTE: The screens below refer to Windows XP

Service Pack 2 installation. Screens may differ

depending on the operating system you are

using.

1

TURN THE PRINTER OFF.

You hear the operation sound until the printer

is turned off. It may take about 30 seconds.

2

Turn the computer on and start Windows.

NOTE:

• For Windows XP or Windows 2000, log on

to Windows as a member of Administrators

group before continuing.

• Before installing the driver, disable all anti-

virus programs and automatically loading

programs.

IMPORTANT: If you see the Found New

Hardware Wizard, click Cancel. Next, remove

the USB cable connected to your computer.

Then proceed from step 3 to install the printer

driver.

3

Insert the Setup CD-ROM. The setup program

should run automatically.

4

When the main menu appears, click Easy

Install and follow the on-screen instructions.

NOTE:

• Select Easy Install in order to install the

application software, electronic manuals and

printer driver. Select Custom Install in order to

choose the options you would like to install.

• To install PhotoRecord or Adobe

RGB (1998),

click Custom Install and follow the instruction

on the screen.

• Adobe RGB (1998) cannot be installed in

Windows Me and Windows 98.

5

When the list of applications to install appears,

verify the contents, click Install, then follow

the instructions on the screen.

Move the cursor over items to display

explanations of each application below.

Read the License Agreement and click Yes.

Follow the on-screen instructions to install

the software. If the message asking for

your confirmation to restart your computer

appears, click OK. The system is restarted

automatically.

7

When the Printer Connection screen appears,

connect the USB cable to the computer and

the other end to the printer.

8

TURN THE PRINTER ON.

IMPORTANT: If you cannot proceed to the

next procedure after two minutes, refer to

"Troubleshooting" instructions in the Quick

Start Guide.

If the message asking for your confirmation

to restart your computer appears, click OK.

The system is restarted automatically.

9

Follow the on-screen instructions to

install the remaining software. When the

Installation Results screen appears, click

Next.

10 

Follow the on-screen instructions to register

your product.

If the message asking for your confirmation

to restart your computer appears, click OK.

The system is restarted automatically.

When the Installation completed successfully

screen appears, click Exit.

If Restart is displayed, ensure the Restart

the system now (recommended) check box is

selected, then click Restart.

NOTE:

• Use Mac

OS X v.10.2.8 to 10.4.x.

• The screens below refer to Mac OS X v.10.4.x

installation. Screens may differ depending on

the operating system you are using.

• Before installing the driver, disable all anti-virus

programs and automatically loading programs.

• Do not remove or insert the USB cable during

installation, as this may result in the computer

or printer not operating normally.

1

Connect the printer to the computer with the

USB cable.

2

Turn on the computer and start Mac OS X.

3

Insert the Setup CD-ROM.

NOTE:

• If the CD-ROM folder does not open

automatically, double-click the on the

desktop.

• Log on as an Administrator before continuing.

4

Double-click the Setup icon.

5

When the Authenticate screen appears, enter

your administrator name and password. Click

OK.

If you do not know your administrator name

or password, click

on the lower-left corner

of the screen, then follow the on-screen

instructions.

When the main menu appears, click Easy

Install and follow the on-screen instructions.

NOTE: Select Easy Install in order to install

the application software, electronic manuals

and printer driver. Select Custom Install in

order to choose the options you would like to

install.

7

When the Easy Install screen appears, click

Install.

NOTE: If you point to an application in the list,

the explanation for the printer driver or an

application is displayed.

8

Read the License Agreement, then click Yes.

Follow the on-screen instructions to install

the software.

9

Follow the on-screen instructions to register

your product.

10 

When the Installation completed successfully

screen appears, click

Restart.

After restarting the computer, select

Applications from the Go menu. Double-click

the Utilities folder, and then double-click the

Printer Setup Utility (Print Center when you

use Mac OS X v.10.2.8) icon. Check that your

printer name is displayed on the Printer List.

If your printer name is not displayed on the

Printer List, click Add to add the printer.

For details, refer to the Printer Setup Utility

Help or Mac Help.

Part no. QT5-0384-V01 © 2006 Canon Inc. "Windows" is a trademark of Microsoft Corporation, registered in the United States and other countries. "Macintosh" and "Mac" are trademarks of Apple Computer, Inc., registered in the U.S. and other countries.

"Adobe" and "Adobe RGB (1998)" are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries. Specifications are subject to change without notice. Printed in Thailand.

6 Windows

Printer Driver Installation 6 Macintosh

Printer Driver Installation 7 Cassette Loading

You can load paper in both the auto sheet feeder

and cassette.

1

Pull out the cassette from the bottom of the

printer.

2

Remove the cover of the cassette.

3

For A5 or larger sized paper, pull the tab

towards you to unlock before extend the

cassette.

A5 or larger

(nonstandard-size paper: 203 mm/8 inches or