Direct Printing Guide

42
Performing Infrared Communication
You can print photos in your mobile phone.
When printing through infrared communication, also refer to your mobile phone manual.
1 Turn on the printer.
2 Load the paper.
See “Loading Paper” on page 11.
3 Press the Feed Switch
Feed SwitchFeed Switch
Feed Switch button to select the paper source in which you loaded
the paper.
4 Set the print setting.
See “Setting the Page Size, Media Type, and Layout When Printing From a Mobile
Phone” on page 40.
5 Start Infrared Communication.
(1) Oppose the infrared port of the mobile phone to that of the printer at a distance
of less than 20 cm.
(2) Select the photo to print and send the data to the printer using the infrared
communication function of the mobile phone.
Printing will start after receiving all data.
The effective angle of the infrared port of the printer is about 10° from the
central axis in both vertical and horizontal directions.
The allowable distance of communication with the printer depends on the
mobile phone you use. For this distance, refer to your mobile phone
manual.
Infrared port of printer
Effective angle (in both
vertical and horizontal
direction): About 10°.
Infrared port of mobile phone
Less than 20 cm
(Do not block with any obstacle.)
iP6700D_DPG_US.book Page 42 Thursday, April 13, 2006 11:05 AM