iP6210D Direct Printing Guide

Removing a Memory Card

1 Open the card slot cover.

2 Ensure that the indicator lamp is not flashing, then remove the memory card.

3 Close the card slot cover.

 When OFF

OFFOFF

OFF is selected in the READ-ONLY MODE

READ-ONLY MODEREAD-ONLY MODE

READ-ONLY MODE screen, you cannot print

photos in the memory card. After using the card slot as the memory

card drive of the computer, remove the memory card, then be sure to

select ON

ON ON

ON in the READ-ONLY MODE

READ-ONLY MODE READ-ONLY MODE

READ-ONLY MODE screen again. See “Setting up the

Card Slot as the Memory Card Drive of the Computer” on page 35.

 If you have used a computer to edit or process the data stored in the

memory card, be sure to print photos from the computer. Using the

operation panel to print photos may result in improper printing.

If you use the printer connected to your computer, follow the instructions

for removal of the memory card from the computer. For the procedure, see

“Setting up the Card Slot as the Memory Card Drive of the Computer” on

page 35.

Removing the memory card or turning off the printer while the

indicator lamp is flashing can damage the data stored in the memory

card.

PIXMA_iP6210D_DPG_US.book Page 11 Thursday, June 9, 2005 4:05 PM