iP4700 series Getting Started

7
1 2 3 5 64
1
2
1
4
2
A
B
C
Install the Ink Tanks
Be sure to use the supplied ink tanks.•
Pull the orange tape (1) in the direction of the
arrow to peel off the protective lm and remove
the lm (2) completely.
Handle the ink tanks carefully. Do not drop or
apply excessive pressure to them.
•
Do not hold the sides of the ink tank; ink may splash.•
If the Top Cover is left open for more than 10
minutes, the Print Head Holder moves to the
right. In this case, close and reopen the Top
Cover.
•
While pressing down with your left thumb, twist off the
orange protective cap (A) located on the bottom of the
ink tank.
Do not touch the electrical contacts (B) or open ink port (C)
on the ink tank. The printer may not print properly if you touch
them.
•