Operation Manual

The Printer Cannot Be Powered On
Check1
Press the ON button.
Check2
Make sure that the power plug is securely plugged into the power cord
connector of the printer, then turn it back on.
Check3
Unplug the printer from the power supply, then plug the printer back in and turn
the printer back on after leaving it for at least 2 minutes.
Check4
If you use a battery, check the remaining level of the battery.
For details on how to check it, refer to the battery's instruction manual.
If the battery is running out, replace the battery with a charged one, or connect the AC adapter to the printer.
If the problem is not resolved, contact the service center.
348