Operation Manual

Connecting Computer or Smartphone to Printer Directly via
Wireless LAN (Access Point Mode)
The printer has a function to connect a computer or smartphone to the printer directly via wireless LAN,
allowing you to perform printing operation. Follow the procedure below to use this function.
1. Change printer setting.
2. Connect computer or smartphone to printer.
3. Perform printing operation.
For more on printing operation, refer to device's or application's instruction manual.
Important
• If a device has already been connected to the printer via wireless LAN and you want to add a device to
connect, connect it to the printer directly. You can connect up to 5 devices to the printer at the same
time.
• For restrictions when you change the connection method from direct connection to connection via a
wireless router:
Restrictions
Changing Printer Setting
Change the printer setting following the procedure below.
1.
Make sure printer is turned on.
2.
Press and hold Wi-Fi button and release it when POWER lamp flashes 3 times.
3. Make sure POWER lamp changed from flashing to lit.
If the POWER lamp is not lit, repeat step 2.
Note
• To check the current access point mode setting of the printer, print out the network setting
information.
Printing Out Network Setting Information
170