Operation Manual

* The Scan standby screen for USB-connected computer
If you change the destination or scan settings, press the Menu button, then go to step 3.
Go to step 8 if you do not change the destination or scan settings.
3.
Select Save to and then press the OK button.
4.
Select the computer to forward the scanned data and then press the OK button.
If you forward the data to the USB-connected computer, select Local (USB).
If you forward the data to the LAN-connected computer, select a name of the computer to forward the
scanned data.
Note
•
If you select Search again and press the OK button, the printer starts searching for the connected
computers again.
•
When you forward the scanned data to the computer using WSD (one of the network protocols
supported in Windows), select Active for WSD scan from dev. on WSD setting on Common
settings in LAN settings under Device settings.
WSD setting
5.
Make sure that Document type is selected and then press the OK button.
6.
Select a document type and then press the OK button.
Note
•
When you forward the scanned data to the computer searched using WSD, you cannot select the
document type.
• The * (asterisk) on the LCD indicates the current setting.
Auto scan
The printer detects the type of the originals automatically and the image is forwarded in the
optimized size, resolution and data format.
Important
•
Load originals properly according to their type; otherwise, some originals may not be scanned
properly.
For details on how to load the original:
Loading Originals
•
The following items can be scanned:
Photos, postcards, visiting cards, magazines, newspapers, documents, BD/DVD/CDs
•
The following items cannot be scanned properly.
278