Operation Manual

Transporting Your Printer

When relocating the printer, make sure of the following.

Important

• You cannot take ink out of ink tanks.

• Check if the tank cap is completely inserted. If the ink tank cover is not completely closed, insert the

tank cap properly.

• With the cartridge left installed in the printer, press the ON button to turn off the power. This allows the

printer to automatically cap the print head, thus preventing it from drying.

• Do not remove the cartridge. Ink may leak.

• When transporting the printer, pack the printer in a plastic bag so that ink does not leak.

• Pack the printer in a sturdy box so that it is placed with its bottom facing down, using sufficient

protective material to ensure safe transport.

• Do not tilt the printer. Ink may leak.

• When a shipping agent is handling transport of the printer, have its box marked "THIS SIDE UP" to

keep the printer with its bottom facing down. Mark also with "FRAGILE" or "HANDLE WITH CARE".

• Please handle with care and ensure the box remains flat and NOT turned upside down or on its side, as

the printer may be damaged and ink in the printer may leak.

Make sure that the power is turned on.

2. Press and hold RESUME/CANCEL button and release it when Alarm lamp flashes 8 times.

The preparation to transport is executed and the printer is turned off after the preparation is complete.

Do not perform any other operations until the printer completes the preparation.

3. Confirm that the ON lamp is off and unplugging the power cord.

Important

•

Do not unplug the printer while the ON lamp is lit or flashing, as it may cause malfunction or

damage to the printer, making the printer unable to print.

4. Retract the paper output tray and the output tray extension, then close the paper support.