PC140 Operator's Manual

Operating Procedure
37
2
Various Ways to Copy
Position the second original onto the
platen glass so that the top edge is to the
left.
ABC
123
Turn the copy of the first original over as
shown. Then, place it into the multi-stack
tray again.
ABC
123
Make a copy of the second original.
NOTICE:
• 16 to 32-lb bond paper can be used when
making two-sided copies.
• If the copy paper becomes curled during the first
copy pass, smooth it flat before proceeding with
the second copy.
MEMO:
• If several sheets are placed into the multi-stack
tray during two-sided copying, the leading edge
of the back sides of the paper can become
smeared with toner. If this occurs, place the
paper one sheet at a time into the multi-stack
tray.
Copying Thick Books
or Large Originals
When copying thick books, large
originals or three-dimensional
objects, detach the platen cover
as explained below to make it
easier.
Grip the platen cover gently with both
hands, as shown in the illustration, and
lift it about 1/4” upwards.
02/ PC140-USA 10/10/03, 7:38 AM37